Methods of measurement for radio transmitters. Part 7: Cabinet radiation at frequencies above 1 GHz
Specifies the method which is essentially the same as that described in CISPR publication 11, sub-clause 5.2.2. With this method, emphasis has been laid on simplicity and reproducibility, rather than on rigorous scientific method. lt has been purposely developed for use in an ordinary laboratory room to avoid the use of an expensive anechoic room. The method is intended for type tests but it may…
Five types of condensors of three calsses according to design and the relative position of the colling medium with the nominal jacket length are specified: water jacket condenser (Allihn condenser, Liebig-West condenser and coiled destillate candenser), coolant-tube condenser, and double-section condenser. The material and the construction with ground glass joints are described by figures and…
Polyethylene (PE) pipes — Pressure drop in mechanical pipe-jointing systems — Method of test and req...
Specification of a laboratory test assembly with the pipe-jointing system to be tested. A water flow of 2 m/s through the pipe assembly is adjusted and the resulting pressure drop is determined.
The requirements specify material including its hydrolytic resistance and thermal coefficient of expansion. The range of sizes and tolerance and external diameters and well thickness are tabled and described. In a second table the limits on bow for different external diameters are specified.