Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO...
This International Standard specifies two procedures for the preparation of laboratory sheets prior to measuring thediffuse blue reflectance factor (ISO brightness). One is the traditional procedure based on preparation of sheets in aBüchner funnel using a filter paper or a wire screen. ln the other procedure, the sheets are prepared in a standardsheet former (conventional or Rapid Köthen).…
Agricultural Cabs - Environmental Air Quality. Part 2: Pesticide Vapor Filters
- Test Procedure an...
Purpose and scope
1.1 Mobile equipment such as tractors and self-propelled sprayers are often
used in agricultural operations where pesticides are present. Such operations
usually require the operator to use personal protective equipment (PPE). The
type of cab used to provide respiratory and skin protection is termed ECPAR -
an enclosed cab for pesticide application incorporating…
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-0...
A technical report for use by test houses and other users. It assists them with determining and recording verification of conformity of the equipment under test with the requirements of IEC 61010-2-010 (1992) plus Amendment 1 (1996). If the paper version of the report is ordered, a diskette is provided with fill-in tables for recording the test results. If the report is downloaded directly from…
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-0...
A technical report for use by test houses and other users. It assists them with determining and recording verification of conformity of the equipment under test with the requirements of IEC 61010-2-051 (1995). If the paper version of the report is ordered, a diskette is provided with fill-in tables for recording the test results. If the report is downloaded directly from the web, it consists of…
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-0...
A technical report for use by test houses and other users. It assists them with determining and recording verification of conformity of the equipment under test with the requirements of IEC 61010-2-061 (1995). If the paper version of the report is ordered, a diskette is provided with fill-in tables for recording the test results. If the report is downloaded directly from the web, it consists of…
Paints and varnishes — Testing of formaldehyde-emitting coatings and melamine foams — Determination ...
This International Standard specifies a test method for determining the equilibrium concentration of formaldehydefrom formaldehyde-emitting coatings and melamine foams in a small test chamber.It describes the determination of the equilibrium concentration of formaldehyde that is established in air at 23 °C and50 % relative humidity. The test closely simulates practical conditions and can be…
Photography — Sensitometry of screen/film systems for medical radiography — Part 3: Determination of...
This part of ISO 9236 specifies methods for determination of the sensitometric curve shape, average gradient and
speed of a single sample of a screen/film/filmholder/processing system in mammography.
The filmholder may be any means which ensures close screen/film contact and prevents the film from being
exposed to ambient light. In particular, the filmholder may be a light-tight vacuum bag, as…
Laboratory glassware — Separating funnels and dropping funnels
This International Standard specifies details of an internationally acceptable series of glass separating funnels and dropping funnels suitable for general use in laboratories.
Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results
Provides guidance on the use and interpretation of results obtained from laboratory tests. Discusses available approaches to toxic hazard assessment consistent with the approach of ISO TC 92 SC 3, as set out in ISO/TR 9122-6. Gives guidance on the use of toxic potency data in hazard assessment and on principles which underlie the use of combustibility and toxicological information in hazard…