Rechercher

1. SCOPE 1.1 This method of test is applicable to firestop systems with or without penetrating items. These firestop systems are intended for use in openings in fire resistive wall and floor assemblies and membranes forming part of an assembly required to have a fire resistance rating and linear openings between adjacent fire resistive floor assemblies, wall assemblies or both.1.2 Tests…

1. SCOPE 1.1 This method is intended for the semi-quantitative (i.e., ±25%1) determination of ethyl mercaptan odourant (within the range of 5 to 85 mg/L) in liquid propane. It is important to confirm that recently stenched propane is odourized to the required level. The method is intended for field application and may be suitable for use by non-laboratory personnel after suitable training. A…

ISO 6270-2:2005 describes the general conditions and procedures which need to be observed when testing coated test specimens in constant condensation-water atmospheres or in alternating condensation-water atmospheres, in order to ensure that the results of tests carried out in different laboratories are reproducible. It does not cover the shape and preparation of the test specimens, the duration…

ISO 10821:2005 identifies hazards and specifies safety requirements applicable to sewing machines, sewing units and sewing systems designed for professional (industrial, commercial or laboratory) use in industries including the clothing and footwear, leather goods, shirts and blousery, hosiery and knitwear, lingerie, glove, upholstery and packaging industries, and in shoe repair. The use of such…

Deals with the techniques for sampling free gases from gas-collecting relays and for sampling oil from oil-filled equipment such as power and instrument transformers, reactors, bushings, oil-filled cables and oil-filled tank-type capacitors. Three methods of sampling free gases and three methods of sampling oil are described; the choice between the methods often depends on the apparatus available…

ISO 18164:2005 specifies methods for measuring rolling resistance, under controlled laboratory conditions, for new pneumatic tyres designed primarily for use on passenger cars, trucks, buses and motorcycles. The relationship between values obtained and the fuel economy of the vehicle is undetermined, and such values are not intended to be used to indicate levels of performance or quality. ISO…

Applicable to a.c. circuit-breakers designed for indoor or outdoor installation, for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1000 V and applied for inductive current switching with or without additional short-circuit current breaking duties. The standard is applicable to circuit-breakers in accordance with IEC 62271-100 that are used to switch high-voltage…

ISO 21569:2005 describes the procedure to qualitatively detect genetically modified organisms (GMOs) and derived products by analysing the nucleic acids extracted from the sample under study. The main focus is on polymerase chain reaction (PCR) based amplification methods. It gives general requirements for the specific detection and identification of target nucleic acid sequences (DNA) and for…

ISO 18589-1:2005 specifies the general requirements to carry out radionuclides tests on soil sample, including sampling. ISO 18589-1:2005 is addressed to people responsible for determining the radioactivity present in soils for the purpose of radiation protection. This may concern soils from gardens and farmland, urban or industrial sites, as well as soil not affected by human activities. ISO…

ISO/TS 22476-10:2005 specifies laboratory test methods to establish the effective shear strength parameter for soils within the scope of the geotechnical investigations according to EN 1997-1 and EN 1997-2. The test method consists of placing the test specimen in the direct shear device, applying a pre-determined normal stress, providing for draining (and wetting if required) of the test specimen…