Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
ISO 4892-4:2013 specifies methods for exposing specimens to open-flame carbon-arc lamps in the presence of moisture to reproduce the weathering effects that occur when materials are exposed in actual end-use environments in daylight or daylight filtered through window glass.
Electromagnetic compatibility (EMC) — Part 4-12: Testing and measurement techniques — Ring wave immu...
1 Scope and object
This part of IEC 61000 relates to the immunity requirements and test methods for electrical
and electronic equipment, under operational conditions, to non-repetitive damped oscillatory
transients (ring waves) occurring in low-voltage power, control and signal lines supplied by
public and non-public networks.
The object of this basic standard is to establish the immunity…
Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration tr...
ISO 10819:2013 specifies a method for the laboratory measurement, data analysis, and reporting of the vibration transmissibility of a glove with a vibration-reducing material that covers the palm, fingers, and thumb of the hand. ISO 10819:2013 specifies vibration transmissibility in terms of vibration transmitted from a handle through a glove to the palm of the hand in one-third-octave frequency…
Radiological protection — Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy fo...
The primary purpose of ISO 13304-1:2013 is to provide minimum acceptable criteria required to establish procedure of retrospective dosimetry by electron paramagnetic resonance spectroscopy and to report the results.
The second purpose is to facilitate the comparison of measurements related to absorbed dose estimation obtained in different laboratories.
ISO 13304-1:2013 covers the determination of…
Scope
1.1
This Standard covers vitreous and non-vitreous china plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. This Standard's performance requirements and test procedures apply to all types of water closets and urinals that discharge into gravity drainage systems in permanent buildings and structures, independent of occupancy…
Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 1: General principl...
ISO 12110-1:2013 establishes general principles for fatigue testing of laboratory specimens under a sequence of cycles the amplitude of which varies from cycle to cycle.
This sequence of cycles is called loading time history (see 3.7) and is usually derived from loading measurements performed on components or structures submitted to true service loadings.
Detailed description of service loads…
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
IEC 60695-11-10:2013 specifies small-scale laboratory test procedures intended to compare the burning behaviour of different materials used in electrotechnical products when vertically or horizontally oriented test bar specimens are exposed to a small flame ignition source with a nominal thermal power of 50 W. These test methods determine either the linear burning rate or the self-extinguishing…
Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflec...
ISO 3164:2013 specifies the deflection limiting volume (DLV) to be used when performing laboratory evaluations of structures which provide protection to operators of earth-moving machinery as defined in ISO 6165.
Wholemeal and flour from wheat (Triticum aestivum L.) — Determination of rheological behaviour as a ...
ISO 17718:2013 specifies the determination of rheological behaviour as a function of mixing and temperature increase. It is applicable to all wholemeal and flour samples from industrial or laboratory milling of wheat (Triticum aestivum L.).
