Rechercher

This document specifies requirements and recommendations for the attachments and associated equipment of pilot ladders, and gives guidance on their use. It is applicable, but not limited to, securing ladders at less than full length, deck securing points, hull securing equipment, man-ropes, bulwark openings and accesses, deck access, stanchions, anti-chafing arrangements, and interfaces between…

This document provides general technical guidance for the operation of marine environment impact assessments (MEIA) to assess the degree of impact of deep-sea activities of exploration and exploitation for mineral resources to the marine environment. It does not cover matters related to the legal framework for MEIA and deep-sea activities on energy resources.

This document specifies a method (Baumann) for the macrographic examination of steel by means of contact printing using silver salts and acid. The method is applicable to steels of which the sulphur content is less than 0,40 %. This method can also be applied to cast irons.

This document specifies security-related interindustry commands that are intended to be used for personal verification through biometric methods in integrated circuit cards. It also defines the data structure and data access methods for use of the card as a carrier of the biometric reference and/or as the device to perform the verification of the cardholder's biometric probe (on-card…

This document specifies a method for determining the cross tensional strength of the bonded plates of carbon fibre reinforced plastics (CFRPs) to metal assemblies, with a standard specimen loaded in cross tension and under specified conditions of preparation, conditioning and testing. This method is intended for testing those bonded plates used in bonding carbon fibre reinforced plastics (CFRPs)…

This document specifies a laboratory test procedure to evaluate the axial (lateral) kerb impact collision properties of a wheel manufactured either wholly or partly of light alloys. It is intended for passenger car applications, and special vehicle applications where there is a possibility of the wheel impacting the kerb, with the purpose of screening and/or quality control of the wheel.

This document provides a method for assessing the very early oxidative degradation state of polymers during outdoor weathering and indoor accelerated weathering tests and the influence of various additives can also be evaluated. This method is based on an analytical method in which the degree of progress of the oxidative degradation reaction of a polymer is sensitively detected by measurement of…

Le présent document spécifie une méthode permettant de déterminer la quantité de certains composés benzotriazole (UV-320, UV-327, UV-328, UV-350) dans les textiles par chromatographie en phase liquide/spectrométrie de masse en tandem (LC-MS/MS), par chromatographie en phase liquide/détecteur à barrettes de diodes (LC-DAD) ou par chromatographie en phase gazeuse avec spectrométrie de masse (GC-MS…

This document specifies a method for determining the amount of certain benzotriazole compounds (UV-320, UV-327, UV-328, UV-350) in textiles by using liquid chromatography-tandem mass spectrometry (LC-MS/MS) or liquid chromatography-diode array detector (LC-DAD) or gas chromatography with mass spectrometry (GC-MS). The method is applicable to all kinds of textile materials (fibres and fabrics).

This document specifies three methods for the determination of the permeability to gases of vulcanized or thermoplastic rubber under a differential partial pressure. The three methods specified are as follows: —    a pressure sensor method (using vacuum): for determining the gas transmission rate, gas permeability coefficient, gas diffusion coefficient and gas solubility coefficient; —    a…