Design criteria and test methods for removable shrink labels applied to PET bottles
This document provides design criteria and test methods to evaluate the removability of shrink labels applied to PET bottles when the packaging supplier intends that the shrink label is to be separated by the consumer or recycling facility, including:
a) design criteria such as visual indications of the starting point of separation, finger tab or initiation cuts, label material, shape of…
Aerospace fluid systems — Clamp blocks for tube lines having axial alignment — Design requirements a...
This document describes clamp blocks for tube lines having axial alignment, with or without electrical grounding, designed for a range of tube outside diameters from 4 mm to 36 mm selected from ISO 2964. This document specifies the dimensions of clamp blocks and the test methods for qualification testing.
This document specifies requirements and test methods for the performance of materials and readymade garments for protection against the effects of precipitation (e.g. rain, snowflakes), fog and ground humidity. Garments for protection against other effects than precipitation (e.g. water splashes, waves) are excluded from this document.
The protective effects and requirements of footwear, gloves…
Assistive products for walking, manipulated by one arm — Requirements and test methods — Part 4: Wal...
This document specifies requirements and test methods of walking sticks with three or more legs used as assistive products for walking, manipulated by one arm, without accessories, unless specified in the particular test procedure. This document also gives requirements related to safety, ergonomics, performance and information supplied by the manufacturer, including marking and labelling.
The…
Ergonomics of human-system interaction — Part 920: Tactile and haptic interactions
This document specifies requirements and recommendations for tactile/haptic hardware and software interactions. It provides guidance on the design and selection of hardware, software and combinations of hardware and software interactions, including:
— the design or use of tactile/haptic inputs, outputs and/or combinations of inputs and outputs, with general guidance on their design or use as…
Habillement de protection — Protection contre la pluie
Le présent document spécifie les exigences et les méthodes d'essai applicables aux performances des matériaux et des vêtements prêts-à-porter en matière de protection contre les intempéries (par exemple, précipitations sous forme de pluie ou neige), brouillard et humidité du sol. Les vêtements de protection contre les effets autres que les précipitations (par exemple, projections d'eau…
Ergonomie de l'interaction homme-système — Partie 920: Interactions tactiles et haptiques
Le présent document donne des exigences et des recommandations ergonomiques relatives aux interactions tactiles/haptiques des matériels et des logiciels. Elle fournit des lignes directrices relatives à la conception et à la sélection des interactions des matériels et des logiciels ainsi que de leurs combinaisons, y compris:
— la conception ou l'utilisation des entrées et sorties tactiles…
Produits d'assistance à la marche manipulés avec un bras — Exigences et méthodes d'essai —...
Le présent document spécifie les exigences et les méthodes d'essai relatives aux cannes à trois pieds ou plus, utilisées comme produits d'assistance à la marche manipulés avec un bras, sans accessoires, sauf spécification dans le mode opératoire d'essai particulier. Le présent document donne également les exigences en matière de sécurité, d'ergonomie, de performances et les…
Environmental management — Life cycle assessment — Requirements and guidance for organizational life...
This document specifies additional requirements and gives guidance for an effective application of ISO 14040:2006 and ISO 14044:2006 to organizations.
This document provides:
— the application of life cycle assessment (LCA) principles and methodology to organizations;
— the benefits that LCA can bring to organizations by using LCA methodology at an organizational level;
— the system…
Software engineering — Life cycle processes — Software acquisition
This document describes a set of useful activities, tasks, methods, and practices that acquirers of software and related services from unrelated (external) suppliers can apply to help ensure an efficient and effective acquisition of software or software services. These practices can be applied in competitive and in sole source procurements, regardless of the type, size, complexity, and cost of…
