Industrial tyres and rims — Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims w...
This document specifies the load ratings of the metric series of pneumatic tyres primarily intended for industrial vehicles for use on prepared surfaces.
ISO 3739-1 deals with designation, dimensions and marking; ISO 3739-3 deals with rim contours for these tyres.
Industrial tyres and rims — Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims w...
This document specifies the main requirements of the metric series of pneumatic tyres primarily intended for industrial vehicles, including designations, dimensions and markings. The tyres are based on the following parameters:
— speeds not exceeding 50 km/h;
— use on 5° tapered or flat base rims.
The conversion of code-designated industrial tyres into metric-designated tyres is outside the…
Fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: En...
ISO 13347-3:2004 applies to industrial fans as defined in ISO 5801 and ISO 13349. It is limited to the determination of airborne sound emission for the specified set-ups. Vibration is not measured, nor is the sensitivity of airborne sound emission to vibration effects determined.
The sizes of fan which can be tested in accordance with ISO 13347-3:2004 are limited only by the practical aspects of…
Seal-less rotodynamic pumps — Class II — Specification
1.1 This International Standard specifies the requirements for seal-less rotodynamic pumps that are driven with
permanent magnet coupling (magnet drive pumps) or with canned motor, and which are mainly used in chemical
processes, water treatment and petrochemical industries. Their use can be dictated by space, noise, environment
or safety regulations.
Seal-less pumps are pumps where an inner…
Coal — Determination of bulk density of coal as it is handled in industrial practices
ISO 23499:2013 provides description of a cone procedure for determining an uncompacted bulk density of crushed coal less than 37 mm in size, such as is charged into coke ovens. It focuses on the uncompacted bulk density of coal resulting from flowing the material into a measuring container (box) in the absence of compacting forces.
ISO 23499:2013 does not cover procedures for determining a…
Traditional Chinese medicine — Salvia miltiorrhiza root and rhizome aqueous extract granules
This document specifies the technical requirements for the industrial manufacturing procedures and quality of Salvia miltiorrhiza formula granules, covering the terms and definitions, general requirements, manufacturing, quality and safety, storage and transportation. It is intended to assure the quality of Salvia miltiorrhiza formula granules products for consumers.
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone — Systèmes de tra...
Le présent document fournit des recommandations pour la planification, la sélection et la mise en œuvre de méthodes et de stratégies de surveillance des risques géologiques qui peuvent interagir avec des conduites.
Le présent document s'applique à la surveillance des risques géologiques liés aux conduites de collecte et de transport terrestres, nouvelles et existantes, et à leur emprise.
Les…
Solid biofuels — Fuel specifications and classes — Part 5: Graded firewood
This document determines the fuel quality classes and specifications of graded firewood. This document covers only firewood produced from the following raw materials (see ISO 17725‑1:2021, Table 1):
— 1.1.1 Whole trees without roots;
— 1.1.3 Stem wood;
— 1.1.4 Logging residues (thick branches, tops etc.);
— 1.2.1 Chemically untreated by-products and residues from wood processing…
Biocombustibles solides — Classes et spécifications des combustibles — Partie 5: Classes de bois de ...
Le présent document détermine les classes et spécifications de qualité du combustible pour le bois de chauffage. Le présent document couvre uniquement le bois de chauffage produit à partir des matières premières suivantes (voir ISO 17725-1:2021, Tableau 1):
— 1.1.1 Arbres entiers sans racines;
— 1.1.3 Grumes;
— 1.1.4 Rémanents forestiers (grosses branches, cimes, etc.);
— 1.2.1…
