Rechercher

ISO 16138:2006 specifies requirements for the design, functional characteristics and manufacture of diaphragm valves made of thermoplastics materials intended for isolating and control service, their connection to the pipe system, the body materials and their pressure/temperature rating between -40 degrees Celsius and +120 degrees Celsius, for a lifetime of 25 years, and also specifies their…

ISO 16139:2006 specifies requirements for the design, functional characteristics and manufacture of gate valves made of thermoplastics materials intended for isolating service, their connection to the pipe system, the body materials and their pressure/temperature rating between -40 degrees Celsius and +120 degrees Celsius, for a lifetime of 25 years, and also specifies their tests. ISO 16139:…

ISO 16784-1:2006 applies to corrosion and fouling in industrial cooling water systems. ISO 16784-1:2006 covers the criteria that must be defined and implemented in a pilot-scale testing programme to select water treatment programmes for use in specific recirculating cooling water systems. ISO 16784-1:2006 covers only open recirculating cooling water systems. Closed cooling systems and once-…

This part of IEC 61212-3 gives requirements for industrial rigid round laminated rolled tubes for electrical purposes, based on different resins and different reinforcements. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for…

IEC 61212-1:2006 gives the definitions related to the designations to be used for, and the general requirements to be fulfilled by, industrial rigid round laminated tubes and rods for electrical purposes made with any of the following resins as the binder: phenolic, epoxy (epoxide), melamine and silicone. The following reinforcements may be used either singly or in combination: cellulosic paper,…

ISO 1126:2006 specifies methods for determining the loss on heating of carbon black for use in the rubber industry. This loss on heating is due primarily to loss of moisture, but traces of other volatile materials may also be lost. The methods are not applicable to treated carbon blacks which contain added volatile materials. The following methods are described: method 1: gravity-convection oven…

L'ISO 1126:2006 spécifie des méthodes de détermination de la perte à la chaleur du noir de carbone destiné à l'industrie du caoutchouc. Cette perte à la chaleur provient en majeure partie de l'humidité, mais elle peut également provenir d'autres matières volatiles. Ces méthodes ne sont pas applicables aux noirs de carbone traités qui contiennent des matières volatiles d'…

IEC 61212-1:2006 gives the definitions related to the designations to be used for, and the general requirements to be fulfilled by, industrial rigid round laminated tubes and rods for electrical purposes made with any of the following resins as the binder: phenolic, epoxy (epoxide), melamine and silicone. The following reinforcements may be used either singly or in combination: cellulosic paper,…

The International Standard ISO 9712:2005 is adopted without modifications (IDT) as a CGSB Standard CAN/CGSB-48.9712-2006/ISO 9712:2005 and has been approved as a National Standard of Canada by the Standards Council of Canada. 1 Scope This International Standard specifies the qualification and certification of personnel involved in non-destructive testing (NDT). It is applicable to…

La Norme internationale ISO 9712:2005 est adoptée sans modification (IDT) comme norme de l'ONGC CAN/CGSB-48.9712-2006/ISO 9712:2005 et est approuvée comme Norme nationale du Canada par le Conseil canadien des normes. 1 Domaine d'application La présente Norme internationale énonce les exigences relatives à la qualification et à la certification du personnel chargé d'…