Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residentia...
This part of IEC 61000 for EMC emission requirements applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments. Emission requirements in the frequency range 0 Hz to 400 GHz are covered. No measurement needs to be performed at frequencies where no requirement is specified. This generic EMC emission standard is applicable if no…
Compatibilité électromagnétique (CEM) - Partie 6-3: Normes génériques - Norme sur l'émission p...
La présente partie de la CEI 61000 concernant les exigences d'émissions en matière de compatibilité électromagnétique s'applique aux appareils électriques et électroniques destinés à être utilisés dans des environnements résidentiels, commerciaux et de l'industrie légère. Les exigences d'émissions dans la gamme de fréquences de 0 kHz à 400 GHz sont couvertes. Il n'est pas…
Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production imme...
L'ISO 13628-2:2006 définit les exigences techniques applicables à des canalisations flexibles, sûres, interchangeables du point de vue dimensionnel et fonctionnel, qui sont conçues et fabriquées selon des normes et des critères uniformes. Elle spécifie des exigences minimales relatives à la conception, au choix des matériaux, à la fabrication, aux essais, au marquage et au conditionnement…
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 2: U...
ISO 13628-2:2006 defines the technical requirements for safe, dimensionally and functionally interchangeable flexible pipes that are designed and manufactured to uniform standards and criteria. Minimum requirements are specified for the design, material selection, manufacture, testing, marking and packaging of flexible pipes, with reference to existing codes and standards where applicable.
ISO…
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial...
This part of IEC 61000 for EMC emission requirements applies to electrical and electronic apparatus intended for use in industrial environments as described below. Emission requirements in the frequency range 0 Hz to 400 GHz are covered. No measurement needs to be performed at frequencies where no requirement is specified. This generic EMC emission standard is applicable if no relevant dedicated…
Analyse sensorielle — Guide général à l'attention du personnel des laboratoires d'analyse ...
L'ISO 13300-1:2006 fournit des lignes directrices relatives aux fonctions attribuées au personnel d'une part, pour améliorer l'organisation du laboratoire d'analyse sensorielle et l'efficacité des essais sensoriels et d'autre part, pour optimiser l'emploi du personnel.
La présente Norme internationale s'applique à tous les organismes qui prévoient la mise…
Sensory analysis — General guidance for the staff of a sensory evaluation laboratory — Part 1: Staff...
ISO 13300-1:2006 provides guidance on staff functions in order to improve the organization of a sensory evaluation laboratory, to optimize the use of personnel, and to improve the efficiency of sensory tests.
It is applicable to any organization planning to establish a formal structure for sensory evaluation. The main aspects to be considered are the education, background and professional…
Appareils électrodomestiques et analogues - Sécurité - Partie 2-55: Règles particulières pour les ap...
La presente norme nationale du Canada est équivalente a la norme internationale IEC 60335-2-55:2005.
1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric appliances for use with aquariums and garden ponds for household and similar purposes, their rated voltage being not more
than 250 V.
NOTE 101 Examples of…
Non-destructive testing — Guidelines for NDT training syllabuses
ISO/TR 25107:2005 gives guidelines for non-destructive testing (NDT) training syllabuses, with the intention of harmonising and maintaining the general standard of training of NDT personnel for industrial needs. It also establishes the minimum requirements for effective structured training of NDT personnel to ensure eligibility for qualification examinations leading to third-party certification…
