Rechercher

IEC 60728-1-2:2014 provides the minimum performance requirements to be fulfilled in operation at the system outlet or terminal input and describes the summation criteria for the impairments present in the received signals and those produced by the CATV/MATV/SMATV cable network, including individual receiving systems. It is applicable to cable networks intended for television signals, sound…

IEC 60728-1-1:2014 is applicable to RF cabling for two-way home networks with wired cords or wireless links inside a room and primarily intended for television and sound signals operating between about 5 MHz and 3 000 MHz. The frequency range is extended to 6 000 MHz for distribution techniques that replace wired cords with a wireless two-way communication. This second edition cancels and…

IEC 60728-14:2014 describes the system and equipment specification of FTTH/FTTB (fibre to the home/fibre to the building) networks where information is transmitted in both, forward and return path directions using RF subcarrier multiplexing technology, and where the return path transmission uses additionally time division multiple access technique imposed by the transmission of the return path…

IEC 62481-4:2014 describes the set of guidelines based on DLNA DRM Interoperability Solutions (DIS), which are defined as methods to enable the secure transfer and use of protected commercial content among different implementations on network media devices. This content could be protected by different content protection technologies. In this standard they are referred to as DRMs.

ISO/IEC 29145-1:2014(E) specifies the physical (PHY) layer of WiBEEM (Wireless beacon-enabled energy efficient mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh network topology as well as device mobility and QoS.

ISO/IEC 29145-2:2014(E) specifies the MAC of the WiBEEM (Wireless beacon-enabled energy efficient mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh network as well as device mobility and QoS.

ISO/IEC 29145-3:2014(E) specifies the network layer (NWK) of the WiBEEM (Wireless Beacon-enabled Energy Efficient Mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh network as well as device mobility and QoS.

Scope 1.1 This Standard applies to newly produced vented gas fireplace heaters (see Clause 3, Definitions), hereinafter referred to as appliance(s), constructed entirely of new, unused parts and materials, and having input ratings up to and including 400,000 Btu/hr (117 228 W); a) for use with natural gas; b) for use with liquefied petroleum (propane); c) direct vent appliances for…

Scope 1.1 This Standard applies to newly produced vented gas fireplaces (see Clause 3, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials and having input ratings up to and including 400,000 Btu/hr (117 228 W). These appliances are for: a) use with natural gas; b) use with propane; c) direct vent gas appliances for manufactured…

This Standard covers ME EQUIPMENT that is intended to be installed or used in accordance with CSA C22.1, Canadian Electrical Code, Part I. Subclause 1.1 of The general standard is replaced by: This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of PULSE OXIMETER EQUIPMENT intended for use on humans, hereafter referred to as ME EQUIPMENT. This includes any part…