Rechercher

1.1 This Standard applies to single- and multiple-station carbon monoxide (CO) alarming devices and the CO portion of multi-criteria and multi-sensor (combination) alarms (hereafter referred to as devices). These devices are intended for use in ordinary locations in residential occupancies and include, but are not limited to, dwelling units, recreational vehicles and mobile homes, unconditioned…

1.1 Application This Standard applies to single- and multi-section buildings supported on longitudinal floor beams, or perimeter rim joists designed to perform as beams. 1.2 Issues addressed This Standard specifies requirements for the following aspects of building installation: a) site preparation; b) permanent foundations; c) anchorage to resist overturning and pier toppling due to wind…

This part of ISO/IEC 14543 specifies the message structure, sequences and protocol of the application layer for use in network enhanced control devices of the Home Electronic System (HES) Class 1. It provides the services and the interface for the user-level process. This application layer protocol is independent of lower communications layers, which support MAC addressing or IP addressing. The…

This part of ISO/IEC 23008-3 specifies technology which supports the efficient transmission of 3D audio signals and flexible rendering for the playback of 3D audio in a wide variety of listening scenarios. These include 3D home theater setups, 22.2 loudspeaker systems, automotive entertainment systems and playback over headphones connected to a tablet or smartphone.

IEC 60335-2-35:2012+A1:2016 deals with the safety of electric instantaneous water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Instantaneous water heaters incorporating bare heating elements are within the scope of this standard.…

ISO/IEC TR 15067-3-2:2016(E) This Technical Report is based on work done by the GridWise Architecture Council. It describes a framework for identifying and discussing interoperability issues to facilitate the integration of entities that interact with electric power systems.

ISO/IEC TR 15067-3-2:2016(E) This Technical Report is based on work done by the GridWise Architecture Council. It describes a framework for identifying and discussing interoperability issues to facilitate the integration of entities that interact with electric power systems.

1.1 This Standard applies to newly produced vented decorative gas appliances (see Clause 3, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials and having input ratings up to and including 400,000 Btu/hr (117 228 W). These appliances are for: a) use with natural gas; b) use with propane; c) direct vent gas appliances for…

1.1 This Standard applies to automatically operating gas-fired central furnaces (see Clause 3, Definitions), hereinafter referred to as furnaces, for installation in residential, commercial, and industrial structures including furnaces for direct vent, recreational vehicle, outdoor, and manufactured (mobile) homes. These furnaces may include a cooling unit. All units are to be constructed…

ISO 22870:2016 gives specific requirements applicable to point-of-care testing and is intended to be used in conjunction with ISO 15189. The requirements of this document apply when POCT is carried out in a hospital, clinic and by a healthcare organization providing ambulatory care. This document can be applied to transcutaneous measurements, the analysis of expired air, and in vivo monitoring of…