Rechercher

Scope Replacement: This part of the 80601 International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ELECTROENCEPHALOGRAPHS as defined in 201.3.204, hereafter also referred to as ME EQUIPMENT or ME SYSTEM. This document is applicable to ELECTROENCEPHALOGRAPHS intended for use in professional healthcare facilities, the EMERGENCY MEDICAL SERVICES ENVIRONMENT or the HOME…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric dishwashers for household and similar purposes that are intended for washing and rinsing dishes, cutlery and other utensils, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances intended for normal household…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of microwave ovens for household and similar use, their rated voltage being not more than 250 V. This standard also deals with combination microwave ovens, for which Annex AA is applicable. This standard also deals with microwave ovens intended to be used on board ships, for which Annex…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of electric clothes dryers for drying textiles on racks located in a warm airflow, clothes dryers intended for drying footwear or gloves and to electric towel rails, for household and similar purposes, their rated voltage being not more than 250 V. NOTE 101 The clothes racks can be fixed…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric stationary circulation pumps for household and similar purposes intended for use in heating systems or in service water systems, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 The hydraulic and…

1 Scope 1.1 General This Standard is intended to form the basis of a QMS within a health care or home setting for the purpose of providing safe, reliable kidney dialysis treatments. Note: A comprehensive QMS can be achieved when this Standard is used in combination with the following related Standards: a) CAN/CSA-C22.2 No. 60601-1; b) CAN/CSA-C22.2 No. 60601-2-16; c) CAN/CSA-C22.2 No.…

Purpose This standard provides LTC home teams, leaders, and governing bodies with criteria and guidelines for delivering resident-centred, high-quality care, enabled by a healthy and competent workforce. Applicability This standard applies to teams, leaders, and governing bodies of LTC homes. LTC homes, also referred to as continuing care, personal care, or nursing homes, are settings where…

1 Scope 1.1 Aim This Standard describes energy model QA and QC rules and procedures to help standardize modelling requirements based on the energy model use case, in order to improve confidence in and consistency of modelling results. 1.2 Methodology This Standard provides a methodology for classifying energy model use cases. 1.3 Application This Standard supports the consistent application…

1 Scope 1.1 Application This Standard can be used in the design and construction of new homes, or in alterations to existing housing, as it pertains to accessibility. This includes the design, construction, and alteration of built environments leading up to, into, and throughout accessible dwellings. The requirements in this Standard are suitable for permanent dwellings, short-term dwellings…

1 Scope 1.1 Standard addresses This Standard is intended to address the safe, effective, and reliable reprocessing of reusable medical devices at each phase of the reprocessing workflow, including a) establishing a QMS for the MDRA, including i) key performance indicators; ii) policies and procedures; iii) documentation; iv) roles and responsibilities; v) management review; vi) planning…