Scope
1.1
This Standard provides requirements for public-use playground equipment and playspaces intended for use by children aged 18 months to 12 years, with anthropometric limits based on the 95th percentile.
Notes:
1) The level of challenge required and desired by children varies enormously with age, physical development, and emotional development; therefore, it is almost impossible…
Information technology — Radio frequency identification (RFID) for item management — Software
system...
Scope
This part of ISO/IEC 24791 defines the interface(s) that provide operations on RFID tag data including, but not
limited to, reading, writing, collection, filtering, grouping, and event subscription and notification within the
Software System Infrastructure (SSI).
Specifically, the interface(s) defined by this part of ISO/IEC 24791 provide the following features:
? full support for the…
Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential ...
This is the second edition of CAN/CSA-C22.2 No. 60601-2-3, Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60601-2-3 (third edition, 2012-04). It supersedes the previous…
Liquid petroleum products — Determination of hydrocarbon types and oxygenates in automotive-motor ga...
ISO 22854:2014 specifies the gas chromatographic (GC) method for the determination of saturated, olefinic and aromatic hydrocarbons in automotive motor gasoline and automotive ethanol fuel (E85). Additionally, the benzene content, oxygenate compounds and the total oxygen content can be determined.
This International Standard defines two procedures, A and B.
Procedure A is applicable to automotive…
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells
ISO 11960:2014 specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of ISO 11960:2014. The requirements that define different levels of standard technical requirements…
Automation systems and integration — Key performance indicators (KPIs) for manufacturing operations ...
ISO 22400 defines key performance indicators (KPIs) used in manufacturing operations management.
ISO 22400-2:2014 specifies a selected number of KPIs in current practice. The KPIs are presented by means of their formula and corresponding elements, their time behaviour, their unit/dimension and other characteristics. ISO 22400-2:2014 also indicates the user group where the KPIs are used, and the…
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for elect...
IEC 60335-2-40:2013(E) deals with the safety of electric heat pumps, including sanitary hot water heat pumps, air-conditioners, and dehumidifiers incorporating motor-compressors and hydronic room fan coils, their maximum rated voltages being not more than 250 V for single phase appliances and 600 V for all other appliances.
Appliances not intended for normal household use but which nevertheless…
A3000-13 - Cementitious materials compendium
Preface
This is the fourth edition of the CSA A3000, Cementitious materials compendium. It supersedes the previous editions published in 2008, 2003, and 1998.
Significant changes from the previous edition include the following:
(a) ASTM reference publications have been updated to reflect current ASTM format.
(b) The definition of "…
Scope
1.1 General
This Standard covers wrought steel buttwelding fittings, including extruded headers and factoryproduced bends, primarily intended for use in oil or gas pipeline systems.
1.2 Size, grade, and category
1.2.1 Size
This Standard covers fittings in sizes from NPS 1/2 to NPS 60. (See Table A.1.)
1.2.2 Grade
For other than sour service, this Standard covers fittings from Grade 207…
Scope
1.1 General
This Standard covers wrought steel welding neck and blind flanges primarily intended for use in oil or gas pipeline systems.
1.2 Size, grade, nominal pressure class, and category
1.2.1 Size
This Standard covers flanges in sizes from NPS 1/2 to NPS 60. (See Table A.1.)
1.2.2 Grade
For other than sour service, this Standard covers flanges from Grade 248 to Grade 690. For…