Rechercher

1 Scope This document covers the development process for designers and developers of information for users of software. It describes how to establish what information users need, how to determine the way in which that information should be presented, and how to prepare the information and make it available. It is not limited to the design and development stage of the life cycle, but includes…

1 Scope 1.1 General This Standard applies to a) fenestration systems covered by AAMA/WDMA/CSA 101/I.S.2/A440, including i) vertically sliding windows; ii) horizontally sliding windows; iii) dual-action windows; iv) casement windows, both fixed and operable; v) projecting (awning/hopper) windows; vi) fixed windows; vii) sidelites; viii) transom windows; ix) sliding doors; x…

1 Scope 1.1 This Standard covers plastic plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. 1.2 This Standard covers the following plumbing fixtures: (a) bathtubs and combination tub/showers; (b) lavatories; (c) shower bases and shower stalls; (d) sinks: (i) bar sinks; (ii) kitchen sinks; (iii) laundry sinks; (e) service sinks…

1 Scope 1.1 This Standard applies to free-standing poles of ferrous metal, aluminum, polymeric, concrete, fibre- reinforced structures, and wood, and to their accessories, for use in the support of lighting equipment having ratings of 600 V and less, and intended to be installed in the commercial and industrial nonhazardous locations in accordance with the Rules of the Canadian Electrical Code…

1 Scope 1.1 Application This Standard specifies a test method for three-phase induction motors rated 0.746 kW and higher. The Standard also references energy efficiency levels for three-phase induction motors rated 0.746 kW up to 400 kW. This Standard references energy efficiency levels for both NEMA and IEC motor designations. Efficiency requirements for units rated for operation at 60 Hz are…

1 Scope 1.1 Inclusions This Standard specifies the test methods to be used in measuring the energy efficiency of small direct- current (dc), and single- and small three-phase alternating-current (ac) motors. It includes the following motor types: a) capacitor, permanent-split; b) capacitor, capacitor-start or capacitor-run; c) split phase; d) split phase start, capacitor-run; e)…

1 Scope 1.1 General This Standard applies to proponents making any change to a railway system that is technical, operational, or organizational in nature. The basic elements of the safety management system covered by this Standard include a) procedures for carrying out risk evaluation and analysis; and b) implementing risk control measures whenever a change in operating conditions or new…

This document specifies the mechanical and physical properties of nuts made of non-alloy steel or alloy steel, when tested at the ambient temperature range of 10 °C to 35 °C. This document applies to nuts: —    with ISO metric thread (see ISO 68-1), —    with diameter/pitch combinations according to ISO 261 and ISO 262, —    with coarse pitch thread M5 to M39, and fine pitch thread M8×1 to M39×3…

This document specifies requirements for the integration of numerical control systems (NC systems). It consists of technical and inspection requirements and test methods. This document is applicable to all machine tools using NC systems not already covered by class C standards (including metal cutting machine tools, metal forming machine tools and woodworking machine tools) and for partial…

This document specifies four data formats: User Description (UD), Context Description (CD), Service Description (SD), and Recommendation Description (RD). This document also specifies technologies related to consecutive vibration.