Rechercher

1 Scope 1.1 Application This Standard can be used in the design and construction of new homes, or in alterations to existing housing, as it pertains to accessibility. This includes the design, construction, and alteration of built environments leading up to, into, and throughout accessible dwellings. The requirements in this Standard are suitable for permanent dwellings, short-term dwellings…

1.1 Scope This standard specifies the air interface, including the cognitive radio medium access control layer (MAC) and physical layer (PHY), of point-to-multipoint and backhaul wireless regional area networks (WRANs) comprised of a professional fixed base station (BS) with fixed and portable user terminals. The standard specifies operation in the bands that allow spectrum sharing where the…

1 Scope 1.1 Overview This Standard provides requirements and recommendations for the sharing of data collected at hydrometeorological monitoring stations, and considers the use of equipment and software for doing so. The Standard includes consideration, and any requirements or recommendations thereof, of the following elements: a) the maturity of related networks; b) existing or planned…

Purpose 1.1 Purpose This Standard specifies technical requirements on how to make buildings and the exterior built environment accessible and safely usable by persons with physical, sensory, or cognitive disabilities. Notes: 1) Temporary buildings and facilities provided for public use should also comply with the technical requirements of this Standard. Such temporary facilities can…

1 Scope 1.1 Standard addresses This Standard is intended to address the safe, effective, and reliable reprocessing of reusable medical devices at each phase of the reprocessing workflow, including a) establishing a QMS for the MDRA, including i) key performance indicators; ii) policies and procedures; iii) documentation; iv) roles and responsibilities; v) management review; vi) planning…

This document defines a platform-specific model (PSM) for data exchange, which specifically uses ASN.1 and TCP/UDP (transmission control protocol/user datagram protocol) datagrams which were defined as “DATEX-ASN” in the first edition of this document for AP-DATEX (application profile-data exchange) and other Internet protocol (IP) networks. A PSM is an actual implementation of a platform-…

This document specifies general requirements and performance criteria for the determination of purity of organic compounds through the application of solution state proton (1H) quantitative nuclear magnetic resonance (qNMR) spectroscopy using an internal standard method. This document is applicable to bioactive compounds in functional foods, natural toxins, food additives and pesticides. This…

This document specifies a method for testing the corrosivity of disinfectants against metals and alloys (for example, apparatus, reagents and materials, test specimens, pre-cleaning of test specimens, conditioning, procedure, test report) under total immersion conditions. This document is applicable to the determination of corrosion of disinfectants to metal materials under total immersion. Other…

This document provides guidelines for the design, manufacture, installation, and maintenance of a WPR. It describes the following: —    Measurement principle (Clause 5). Scatterers that produce echoes and methods of wind velocity measurement are described. The description of the measurement principle mainly aims at providing the information necessary for describing the guidelines in Clauses 6 to…

This document specifies the requirements and methods for the clinical investigation of continuous automated non-invasive sphygmomanometers used for the measurement of the blood pressure of a patient. This document does not cover usability aspects such as the form and manner of the data display or output. This document does not specify a numerical threshold on the minimum output period. A…