Information Processing Systems - Open Systems Interconnection - Connection
Oriented Transport Prot...
This National Standard of Canada is equivalent to International Standard ISo
8073-1986.
1. Scope and field of application
This International Standard specifies
a) five classes of procedures:
1) class 0: simple class;
2) class 1: basic error recovery class;
3) class 2: multiplexing class;
4) class 3:…
Magnetic tape exchange format for terminological/ lexicographical records (MATER)
Specifies the requirements for a generalized format, the definition and layout of terminological/lexigraphological data on magnetic tape as well as the meaning and layout of the tags associated with each element.Describes an interchange principle between data processing systems. The annexes are examples which illustrate possible applications. Is designed for information exchange on magnetic tape…
Intended as a guide to the behaviour of this material in contact with chemicals as aggressive gases and fluids, e.g. acids, alkalies, solvents, etc. This information is based on practical experience of manufacturers and users and summarized in tables. Without prior knowledge or experience of application, table-based selections should be confirmed by tests, where attention should be paid to the…
Electrical installations of buildings - Part 6: Verification - Chapter 61: Initial verification
Every installation shall, during erection and/or on completion
before being put into service by the user, be visually inspected
and tested to verify, as far as practicable, that the requirements
of this standard have been met.
Magnetic tape sound recording and reproducing systems. Part 4: Mechanical magnetic tape properties
Applies to non-perforated magnetic tape used for professional and domestic analogue sound recording and reproduction. Lists and defines the methods of measurement and equipment necessary to determine the mechanical characteristics of magnetic recording tape. Will also enable users of magnetic tapes to compare technical product data of different manufacturers, produced in accordance with this…
Rubber — Determination of adhesion to rigid materials using conical shaped parts
Adhesion is obtained by a bonding system which may include not only the rigid material and the rubber compound, but other elements, e.g. thin alloy coatings etc. The bonding system should be adequately specified by the user, but the standard provides for evaluation of differnt types of failure related to a complex adhesion system. The standard test piece is given in a figure, the test report is…
Fluid Supply and Monitoring Systems for Hemodialysis
1. Scope
1.1 General
This Standard applies to
(a) reagents and apparatus for preparing dialysing fluid;
(b) monitors of the dialysing fluid;
(c) accessories for monitoring the extracorporeal blood circuit; and
(d) blood pumps, infusion, and single needle systems.
Notes:
(1) Examples of reagents and devices included within the Scope of this Standard
are dialysis concentrate and…
1. Scope and Purpose
1.1
This Standard applies to the design, installation, operation, and maintenance
of those portions of a hospital electrical system in which the interruption of
the normal supply would jeopardize the effective and safe care of its patients,
the safety of hospital staff, and the public.
1.2
This Standard includes requirements for the installation of a hospital…
Hydraulic fluid power — Filters — Statement of requirements
A statement of requirements (SOR) is defined as a document to be provided by a user to specify his requirements to a manufacturer. A model SOR is described to enable a user to define his requirements fully, without ambiguity and in standard form so that the supplier can meet the requirements as accurate as possible. Annex A contains a standard form for a SOR, annex B shows clearances.
Cranes and lifting appliances — Classification — Part 1: General
Establishes a general classification of cranes based on the number of operating cycles to be carried out during the expected life of the crane and a load spectrum factor which represents a nominal state of loading. Classification considers only the operating conditions which are independent of the type of crane and the way it is driven.
Additional information for the user:
This version uses the…
