Rechercher

Foreword Organizations of all types and sizes are giving increasing attention to establishing systems and procedures that will ensure that their operations are environmentally efficient. They are also considering ways by which the efforts being made in this regard and the results of those efforts can best be communicated to their various audiences. Environmental reporting is still in its…

Defines the main performance characteristics of electric heating pads and specifies methods for measuring these characteristics, for the information of users. Does not specify values for performance characteristics. Does not deal with safety requirements.

1. Scope 1.1 This Guideline defines acceptable indoor air quality (IAQ) and provides methods to help achieve acceptable indoor air quality in office buildings, throughout the conception, design, construction, commissioning, operation, and maintenance stages. 1.2 This Guideline applies to public- and private-sector buil dings used primarily for office functions and is intended to deal…

1.1 General This Standard covers the principal methods of test for hardened and freshly mixed concrete and for concrete materials, as specified in CSA Standards A23.1 and A23.4. 1.2 Safety and Health Practices This Standard does not purport to address the safety problems associated with it use. It is the responsibility of the user of this Standard to establish appropriate safety and…

This National Standard of Canada is based on International Standard CEI/IEC 730-1:1986, first edition, including Amendment 1:1990, Amendment 2:1991 and Amendment 3:1991. 1. Scope 1.1 In general, this standard applies to automatic electrical controls for household and similar use, including electric controls for heating, air conditioning, and similar applications. This…

This National Standard of Canada is based on International Standard CEI/IEC 730-2-1:1989 (first edition). 1. Scope This clause of Part 1 is replaced as follows: 1.1 This standard applies to automatic electrical controls for electrical household appliances within the scope of IEC Publication 335-1 and its relevant Part 2s. Where for a specific control, a Part 2 of Publication 730-1 has…

This National Standard of Canada is based on International Standard CEI/IEC 730-2-3:1990 (first edition). Amendment 1:2001, reaffirmed 2006-02-10. 1 Scope This clause of Part 1 is replaced as follows: 1.1 This standard applies to the evaluation of thermal protectors for ballasts for tubular fluorescent lamps. Requirements concerning the testing of the combination of ballast and…

This National Standard of Canada is based on International Standard CEI/IEC 730-2-4:1990 (first edition). Amendment 1:2001 reaffirmed 2006-02-10. Amendment 2:2002 reaffirmed 2007-03-28. 1. Scope This clause of Part 1 is replaced by the following: 1.1 This standard applies to the partial evaluation of thermal motor protectors as defined in IEC Publication 730-1 for sealed (hermetic and…

This National Standard of Canada is based on International Standard CEI/IEC 730-2-5:1990 (first edition). 1. Scope This clause of Part 1 is replaced as follows: 1.1 This standard applies to automatic electrical burner control systems for the automatic control of burners for oil, gas, coal or other combustibles for household and similar use including heating, air conditioning and…

This National Standard of Canada is based on International Standard CEI/IEC 730-2-6:1991 (first edition). 1 Scope This clause of Part 1 is replaced as follows: 1.1 This standard applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of -60 kPa and a maximum gauge pressure rating of 4,2 MPa, for use in, on or in association with, equipment for household…