Rechercher

This National Standard of Canada is equivalent to International Standard ISO/IEC 15506:2000 (second edition, 2000-03-15). 1 Scope This International Standard specifies the signalling protocol for the support of the Message Waiting Indication supplementary service (SS-MWI) at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected together within a…

This National Standard of Canada is based on International Standard CEI/IEC 335-2-29: 1994 (third edition, 1994-11). 1 Scope This clause of part 1 is replaced by: This standard deals with the safety of battery chargers for household and similar use having an output at safety extra-low voltage, their rated voltage being not more than 250 V. Battery chargers not intended for normal…

1.1 Scope 1.1.1 This standard applies to newly produced vented gas fireplaces (See Part IV, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with propane; c. For direct vent gas appliances for manufactured home (USA only) or mobile home OEM installation or aftermarket installation…

1. Scope 1.1 This Standard prescribes requirements for the classification and certification of (a) carbon steel covered electrodes for shielded metal arc welding (formerly CSA Standard W48.1); (b) chromium and chromium-nickel steel covered electrodes for shielded metal arc welding. This includes electrodes designated for welding heat-resistant steels containing more than 11% chromium…

1. Scope 1.1 This Standard applies to self-propelled integral chassis elevated work platforms that have a platform that cannot be positioned completely beyond the base and that are used to position personnel, along with their necessary tools and materials, at work locations. Self-propelled elevating work platforms(aerial platforms) are power operated with primary functions, including drive,…

1. Scope Note: In many guidelines, all waste contaminated with blood or body fluids is classified as biomedical waste. This enormously increases the volume of waste requiring expensive handling and disposal. Identical items of waste are disposed of from homes with no special handling or decontamination. The identification of every client who carries a blood borne pathogen including, but…

Defines standard procedures for calibrating optical fibre chromatic dispersion test sets. The procedures apply to calibration laboratories, and to manufacturers and users of CD test sets, for: (a) calibrating CD test sets, (b) setting specifications of CD test sets, (c) extending the calibration period of an already calibrated CD test set. It applies to all CD test sets, except for multimode…

Establishes the general requirements for printed boards and the quality and reliability assurance requirements that must be met for their acquisition. Aims at allowing the printed board user and supplier flexibility to develop optimum procedures for the manufacture and procurement of printed boards.

Gives the requirements for four types of heat-shrinkable, flame- retarded, limited-fire-hazard sleeving with a thermal endurance rating of 105 °C as shown below: Class A: thin wall, shrink ratio 2:1, internal diameter up to 102,0 mm Class B: medium wall, shrink ratio 2:1, internal diameter up to 60,0 mm Class C: thick wall, shrink ratio 2:1, internal diameter up to 51,0 mm Class D: medium wall,…

This National Standard of Canada is equivalent to International Standard ISO/IEC 10164-16:1997, first edition, 1997-05-15. 1 Scope This Recommendation 1 International Standard defines the Management knowledge management function. The Management knowledge management function is a Systems Management function which may be used by an application process in a centralized or decentralized…