Rechercher

1. Scope 1.1 This Code applies to the installation, servicing, and repair of natural gas fuel systems on self-propelled vehicles for the provision of motive power. 1.2 This Code does not apply to (a) stationary engines; (b) mobile equipment using natural gas as a fuel for other than propulsion; (c) LNG vaporizers and LNG fuel storage systems; (d) electronic components of a fuel management…

This National Standard of Canada is based on International Standard IEC 60335-2-82:1999 (first edition, 1999-11). 1 Scope This clause of part 1 is replaced by: This standard deals with the safety of electric personal service machines and amusement machines for commercial use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-7:1998, (second edition, 1998-02). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Replacement: This Particular Standard applies to HIGH-VOLTAGE GENERATORS of medical diagnostic X-RAY GENERATORS and to their subassemblies including the following: -…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-2-11:1997, (second edition, 1997-08). 1 Scope and Object This clause of the General Standard applies as follows: 1.1 Scope Addition: aa) This Particular Standard specifies requirements for the safety of GAMMA BEAM THERAPY EQUIPMENT intended for RADIOTHERAPY in human medical practice and includes EQUIPMENT…

This International Standard defines the procedures for noise control of mainly open plants. It is applicable to the following: _ specification of procedures for noise control during engineering of a new plant and modification/extension of existing plants (construction noise procedures are outside the scope of this International Standard but should be considered); _ definition of responsibilities…

This International Standard specifies the Supplementary Service (SS) Single Step Call Transfer (SSCT), which is applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574. SS-SSCT is a supplementary service that enables an SSCT user, user A, to transform an existing call between user A and user B into a new call…

This International Standard specifies the Supplementary Service (SS) Single Step Call Transfer (SSCT), which is applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574. SS-SSCT is a supplementary service that enables an SSCT user, user A, to transform an existing call between user A and user B into a new call…

1. SCOPE 1.1 This Standard covers requirements and test methods for closed cell polyurethane and polyisocyanurate cellular plastic thermal insulation in the form of flat rigid boards covered on both sides with a facing material and primarily intended for use in applications where the continuous use temperature is within the range -60ºC to +93ºC. These rigid boards are not intended to…

Relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 9 kHz up to 80 MHz. Equipment not having at least one conducting cable (such as mains supply, signal line or earth connection), which can couple the equipment to the disturbing RF fields is excluded.…

Relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 9 kHz up to 80 MHz. Equipment not having at least one conducting cable (such as mains supply, signal line or earth connection), which can couple the equipment to the disturbing RF fields is excluded.…