Ergonomics — Construction and application of tests for speech technology
ISO/TR 19358:2002 deals with the testing and assessment of speech-related products and services, and is intended for use by specialists active in the field of speech technology, as well as purchasers and users of such systems.
Information technology - Security techniques - Digital signature schemes giving message recovery - P...
ISO/IEC 9796-2:2002 specifies three digital signature schemes giving message recovery, two of which are deterministic (non-randomized) and one of which is randomized. The security of all three schemes is based on the difficulty of factorizing large numbers. All three schemes can provide either total or partial message recovery.
The method for key production for the three signature schemes is…
Optics and optical instruments — Lasers and laser-related equipment — Test method for the laser-resi...
ISO 11810:2002 specifies a standardized method for testing and classifying surgical drapes and other patient-protective covers with respect to laser-induced hazards. It applies to disposable and reusable, as well as woven and non-woven materials used as surgical drapes and other patient-protective covers which claim to be laser-resistant. An appropriate classification system is given.
It is not…
1. Scope
1.1
This Standard applies to occupational diving operations conducted in connection with all types of work and employment, and describes the requirements for minimum competency levels for all personnel directly associated with the identified techniques of diving.
Canadian safety and health legislation requires that all workers be competent to perform the work assigned to them. This…
Medical electrical equipment - Part 2-13: Particular requirements for the safety of anaesthetic work...
This National Standard of Canada is based on International Standard IEC 60601-2-13:1998 (second edition, 1998-05).
1 Scope and object
This clause of the General Standard applies, except as follows:
Addition
1.2 This Particular Standard presents particular requirements for ANAESTHETIC WORKSTATIONS for inhalational anaesthesia intended for human use supplied complete, as well as particular…
1. Scope
1.1
This Standard sets out requirements for the proper selection, use, and care of respirators and for the administration of an effective respiratory protection program in the workplace.
1.2
This Standard is not intended to address the selection of respirators for use against
(a) infectious agents; and
(b) nuclear biological chemical (NBC) agents.
This Standard applies to…
Spacers and Holding Chambers for Use with Metered-Dose Inhalers
1. Scope
1.1
This Standard sets out requirements for spacers and/or holding chambers (S-HCs) for use with pressurized
metered-dose inhalers. It stipulates the material and components, the packaging and labelling, and
aerosol characterization as determined by in vitro testing.
1.2
This Standard does not address
(a) pressurized metered-dose inhalers (pMDIs) and the medications that are delivered…
ISO 10282:2002 specifies requirements for packaged sterile rubber gloves intended for use in surgical procedures to protect the patient and the user from cross-contamination. It is applicable to single-use gloves that are worn once and then discarded. It does not apply to examination or procedure gloves. It covers gloves with smooth surfaces and gloves with textured surfaces over part or all of…
Information technology — Software measurement — Functional size measurement — Part 4: Reference mode...
Part 4 of ISO/IEC 14143 defines the reference model (Figure 0.1) to be used when verifying a Functional Size
Measurement (FSM) method.
The reference model consists of two components:
- a classification framework of Reference User Requirements (RUR) which can be sized using an FSM
Method. Included are examples of such RUR as well as references to further publications of User
Requirements (UR)…
ISO 12710 describes a set of procedures for the measurement of any performances in an ultrasonic test instrument that has a display screen.
This International Standard establishes the procedures for measuring performance characteristics of components of pulse-echo ultrasonic non-destructive testing instruments including both analog and digital type instruments with screen displays. The aim is to…