Rechercher

1. Scope 1.1 This Standard sets out requirements for spacers and/or holding chambers (S-HCs) for use with pressurized metered-dose inhalers. It stipulates the material and components, the packaging and labelling, and aerosol characterization as determined by in vitro testing. 1.2 This Standard does not address (a) pressurized metered-dose inhalers (pMDIs) and the medications that are delivered…

ISO 10282:2002 specifies requirements for packaged sterile rubber gloves intended for use in surgical procedures to protect the patient and the user from cross-contamination. It is applicable to single-use gloves that are worn once and then discarded. It does not apply to examination or procedure gloves. It covers gloves with smooth surfaces and gloves with textured surfaces over part or all of…

Part 4 of ISO/IEC 14143 defines the reference model (Figure 0.1) to be used when verifying a Functional Size Measurement (FSM) method. The reference model consists of two components: - a classification framework of Reference User Requirements (RUR) which can be sized using an FSM Method. Included are examples of such RUR as well as references to further publications of User Requirements (UR)…

ISO 12710 describes a set of procedures for the measurement of any performances in an ultrasonic test instrument that has a display screen. This International Standard establishes the procedures for measuring performance characteristics of components of pulse-echo ultrasonic non-destructive testing instruments including both analog and digital type instruments with screen displays. The aim is to…

Part 4 of ISO/IEC 14143 defines the reference model (Figure 0.1) to be used when verifying a Functional Size Measurement (FSM) method. The reference model consists of two components: - a classification framework of Reference User Requirements (RUR) which can be sized using an FSM Method. Included are examples of such RUR as well as references to further publications of User Requirements (UR)…

1. Scope This Standard specifies requirements for occupational apparel that is a) capable of signalling the user?s presence visually; and b) intended to provide the user with conspicuity in hazardous situations under any light conditions and under illumination by vehicle headlights. Performance requirements are included for colour, retroreflection, and minimum areas, as well as for the…

1 Scope 1.1 This Standard includes requirements for the safe operation of various types of suspended equipment used to gain access to interior or exterior, or both, sides of buildings or structures. Much of the equipment referred to in this Standard is designed, installed, inspected, and tested in accordance with CAN/CSA-Z271. It does not include crane-suspended platforms or baskets (see CAN/CSA…

ISO 10303-204:2002 specifies the use of the integrated resources necessary for the scope and information requirements for the use and exchange of boundary representation solid models in the mechanical engineering design context. This document describes an application reference environment for the generation and exchange of volume-based design data in the computer-aided mechanical design process,…

This part of ISO/IEC 14543 presents methods for overall building management of the home electronic system (HES) architecture. The interaction of building and home control systems requires a demarcation between building manager versus tenant responsibilities. A method for implementing agreements between building managers and tenants regarding user access to and control of applications via a…

ISO/IEC 21990:2002 specifies the signalling protocol for the support of the Short Message Service (SMS) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). This service is based on GSM 03.40. The Service Centre functionality described in ISO/IEC 21990:2002 is equal to the functionality of a…