Rechercher

Provides various tests for determining the integrity between the lead/package interface and the lead itself when the lead(s) are bent due to faulty board assembly followed by rework of the part for re-assembly. Applicable to all through-hole devices and surface-mount devices requiring lead forming by the user.

1. Scope 1.1 This Standard covers welding requirements for carbon and low-alloy welded steel construction, with the exception of those types listed in Clause 1.2. Requirements that are essentially common to all such structures are covered in Clauses 1 to 10, while provisions applying specifically to statically loaded structures and to cyclically loaded structures are included in Clauses 11 and…

Elastomeric closures may be superficially contaminated with visible and subvisible particles, and fragments can also be produced when the closure is pierced by a needle. Such particles may be transferred to pharmaceutical preparations in contact with the elastomeric parts and affect the quality of such preparations. ISO 8871-3:2003 specifies methods for the determination of the number of visible…

ISO 17771:2002 specifies a method for determining the degree of wetting of the reinforcement in a sheet moulding compound (SMC). It is applicable to quality control by the user of the SMC, as well as to process control during SMC production.

Gives the requirements for E-type glass sleeving using either braided or knitted construction with a continuous flexible coating based on polyvinyl chloride (PVC) or its copolymers or blends thereof. These sleevings have been found suitable up to temperatures of 105 °C. The sleeving is normally available with internal diameters between 0,3 mm and 25 mm and is normally supplied in the following…

An ISO/IEC 11179-based metadata registry (MDR) (hereafter referred to as a "registry") is a tool for the management of shareable data; a comprehensive, authoritative source of reference information about data. It supports the standardization and harmonization processes by recording and disseminating data standards, which facilitates data sharing among organizations and users. It…

ISO 14915-2:2003 provides recommendations and requirements for the design of multimedia user interfaces with respect to the following aspects: design of the organization of the content, navigation and media-control issues. ISO 14915-2:2003 is limited to the design of the organization of the content and does not deal with the design of the content in general. Design issues within a single medium (…

An ISO/IEC 11179-based metadata registry (MDR) (hereafter referred to as a "registry") is a tool for the management of shareable data; a comprehensive, authoritative source of reference information about data. It supports the standardization and harmonization processes by recording and disseminating data standards, which facilitates data sharing among organizations and users. It…

Provides a classification system that serves as a guide for the selection and indexing of insulating materials intended to serve in the radiation environment of nuclear reactor facilities, reactor fuel-processing facilities, irradiation facilities, particle accelerators, and X-ray apparatus. The classification system provides a set of parameters defining the utility of the three types of…

Applicable to cathode ray tubes and cathode ray tube assemblies which are intended for use as components in apparatus and which have integral protection with respect to the effects of implosion. A CRT covered by this standard is intended to be installed in an enclosure designed both to protect the rear of the CRT against mechanical or other damage under normal conditions of operation and to…