Rechercher

This International Standard specifies performance tests, designations, markings, dimensions and other requirements for secondary lithium single cells and batteries for portable applications. The objective of this standard is to provide the purchasers and users of secondary lithium cells and batteries with a set of criteria with which they can judge the performance of secondary lithium cells and…

ISO 15928-1:2003 sets out a method for describing the structural safety performance of houses. It covers user needs, provides performance descriptions, establishes parameter descriptions, and outlines evaluation processes. It includes a description of permanent, imposed, wind, seismic, snow and other actions as well as structural resistance. ISO 15928-1:2003 is intended for use in the evaluation…

1 Scope 1.1 This Standard deals with asphalt-coated roofing sheets composed of asphalt-saturated organic felt coated on one or both sides with asphalt. Depending on their intended use, these sheets can have a coarse or a fine mineral surfacing. 1.2 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with…

This National Standard of Canada is based on Draft International Standard ISO/DIS 11193:2000. 1 Scope This National Standard specifies requirements for packaged sterile, or bulked non-sterile, rubber gloves intended for use in medical examinations and diagnostic or therapeutic procedures to protect the patient and the user from cross-contamination. It also covers rubber gloves intended…

1.1 Scope 1.1.1 This Standard applies to newly produced vented gas fireplaces (See Part IV, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials, and having input ratings up to and including 400,000 Btu per hour. These appliances are: a. For use with natural gas; b. For use with propane; c. For direct vent gas appliances…

CAN/CSA-A3001-03 Cementitious Materials for Use in Concrete 1 Scope 1.1 This Standard addresses the following aspects of various cementitious materials: a) their definitions; b) their chemical, physical, and uniformity requirements; c) the tests required; d) the procedures for inspection and sampling; and e) the units of measurement, packaging, marking, and storage. 1.2 The various…

A257.0-03 Methods for Determining Physical Properties of Circular Concrete Pipe, Manhole Sections, Catch Basins, and Fittings 1 Scope 1.1 This Standard pertains to circular precast concrete pipe, manhole (maintenance hole) sections, and accessories intended for use as sewer pipe for the conveyance of sewage, industrial wastes, and storm water, and for the construction of culverts. 1.2…

1. SCOPE 1.1 This Standard covers requirements and test methods for closed cell polyurethane and polyisocyanurate foam thermal insulation in the form of flat rigid boards covered on both sides with a facing material and primarily intended for use in applications where the continuous use temperature is within the range -60oC to +93oC. These rigid boards are not intended to be used as…

ISO 15169:2003 gives guidance on the selection, installation, commissioning, calibration and verification of hybrid tank measurement systems (HTMS) for the measurement of level, static mass, observed and standard volume, and observed and reference density in tanks storing petroleum and petroleum products in fiscal or custody transfer application. As it is a matter for the user to decide which…

This part of CISPR 16 is designated a basic standard, which specifies the manner in which measurement uncertainty is to be taken in to account in determining compliance with CISPR limits. The material is also relevant to any EMC test when interpretation of the results and conclusions reached will be impacted by the uncertainty of the instrumentation used during the testing. Annex A contains the…