Rechercher

1 Scope 1.1 This Standard applies to flexible metal conduit and liquid-tight flexible metal conduit, trade sizes 12(3/8) to 103(4), excluding 14(7/16), intended for use as a metal raceway for the installation of conductors in accordance with the Canadian Electrical Code, Part I. In addition, this Standard applies to special purpose flexible metal conduit, trade sizes 10(5/16) and 14(7/16),…

1 Scope 1.1 This Standard specifies safety requirements for the design and construction of agricultural front-end loaders (front loaders) designed to be mounted on agricultural wheeled tractors (as defined in CSA M684). The purpose of this Standard is to provide a reasonable degree of personal safety for operators and other persons during normal operation and servicing of agricultural front-…

1 Scope 1.1 This test method determines the wind uplift resistance of mechanically attached membrane-roofing systems subjected to dynamic wind load cycles. The roofing system consists of a deck and roofing membrane. It also includes components such as air/vapour barriers or retarders and insulation. It is subjected to a dynamic load sequence that has been developed based on wind pressure…

Establishes a classification of surface insulations for electrical steel sheet, strip and laminations according to their general composition, relative insulating ability and function. These surface insulations are either oxide layers or applied coatings. The purpose of this classification is to create a nomenclature for the various types of surface insulations and to assist users of surface…

Specifies test methods and requirements for power cable systems for fixed installations, for rated voltages above 30 kV (Um = 36 kV) up to and including 150 kV (Um = 170 kV). It also separately covers cables and accessories. The requirements apply to single-core cables and to individually screened three-core cables and to their accessories for usual conditions of installation and operation, but…

This National Standard of Canada is equivalent to International Standard IEC 61965:2003. 1 Scope This International Standard is applicable to cathode ray tubes and cathode ray tube assemblies (hereinafter referred to as CRTs) which are intended for use as components in apparatus and which have integral protection with respect to the effects of implosion. These requirements apply to CRTs…

1 Scope 1.1 This Standard provides management requirements for facilities that collect, process, store, and use human blood and blood components for transfusion. It addresses issues of safety and efficacy for recipients, and safety for facility personnel and others who are exposed to or potentially affected by blood and blood components. 1.2 This Standard applies to blood centres and…

ISO 10542-5:2004 specifies test methods as well as requirements for design and performance, for instructions and warnings to installers and users, and for product marking and labelling of wheelchair tiedown and occupant restraint systems (WTORS). It applies only to WTORS that are intended to be used with particular makes and models of wheelchairs when used as a forward-facing seat by a passenger…

ISO/IEC TR 14143-5:2004 describes the characteristics of Functional Domains and the procedures by which characteristics of Functional User Requirements (FUR) can be used to determine Functional Domains. Two example methods for implementing these principles are provided in the annexes. Either of the methods may be used directly, or by using Functional Domains defined locally by: FSM Method to…

ISO/IEC TR 14143-5:2004 describes the characteristics of Functional Domains and the procedures by which characteristics of Functional User Requirements (FUR) can be used to determine Functional Domains. Two example methods for implementing these principles are provided in the annexes. Either of the methods may be used directly, or by using Functional Domains defined locally by: FSM Method to…