Acoustics — Guidelines for noise control in offices and workrooms by means of acoustical screens
ISO 17624:2004 deals with the effectiveness of acoustical screens. It specifies the acoustical and operational requirements to be agreed upon between the supplier or manufacturer and the user of acoustical screens.
ISO 17624:2004 is applicable to the following types of acoustical screens: free-standing acoustical screens for offices, service areas, exhibition areas, and similar rooms; acoustical…
1 Scope
1.1
This Standard applies to electric motors and generators for installation and use, in accordance with the Rules of the Canadian Electrical Code, Part I, in non-hazardous locations.
Note: The term "machine" throughout this Standard should be assumed to mean "motor" and "generator".
1.2
Clauses 1 to 6 are general in nature and apply, unless…
Performance of Electric Storage Tank Water Heaters for Domestic Hot Water Service
1 Scope
1.1 General
This Standard specifies requirements related to delivery, minimum standby performance, heater element ratings, and marking of electric storage tank water heaters.
1.2 Tank capacity
This Standard applies to stationary storage tank water heaters that have a rated capacity of 184 or 284 L (40 or 60 gal) and are intended for use with pressure systems in residential premises…
1 Scope
1.1
This Standard applies to electrical equipment that is intended for installation and use in accordance with the requirements of Part I of the Canadian Electrical Code (CEC) and is (a) cord connected or permanently connected and required to be bonded by either Part I or Part II of the CEC; or (b) constructed in a manner intended to ensure that it will be bonded when installed (even…
This is a joint Standard with UL 797.
1 Scope
1.1 These requirements cover electrical metallic tubing - steel (EMT) and elbows for use as a metal
raceway for installation of wires and cables in accordance with CSA C22.1, Canadian Electrical Code,
Part 1, and NFPA 70, National Electrical Code (see Reference Item No. 1, Annex A). EMT is provided with
a zinc, zinc-based, nonmetallic, or other…
This is a joint Standard with UL 6.
1 Scope
1.1 These requirements cover electrical rigid metal conduit ? steel (ERMC-S), elbows, couplings, and
nipples for use as a metal raceway for installation of wires and cables in accordance with CSA C22.1,
Canadian Electrical Code, Part 1, and NFPA 70, National Electrical Code (see Reference Item No. 1,
Annex A). ERMC-S is provided with a zinc,…
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and test...
This National Standard of Canada is based on International Standard CEI/IEC 61496-1:1997.
1 Scope
This part of IEC 61496 specifies general requirements for the design, construction and testing of electro-sensitive protective equipment (ESPE) for the safeguarding of machinery. Special attention is directed to functional and design requirements that ensure an appropriate safetyrelated…
1 Scope
1.1 This Standard applies to all types of laboratory fume hoods, except for recirculating fume hoods.
1.2 This Standard specifies
(a) safety requirements for fume hoods;
(b) test methods for assessing fume hood performance;
(c) requirements for the selection, use, and maintenance of fume hoods;
(d) requirements for the education of fume hood users and maintenance personnel;…
Condition monitoring and diagnostics of machines — Vocabulary
ISO 13372:2004 specifies definitions of terms used in condition monitoring and diagnostics of machines. It is intended to provide users and manufacturers of condition monitoring and diagnostics systems with a common vocabulary.
Vaccum cleaners for household use - Methods of measuring the performance
States and defines the principal performance characteristics of vacuum cleaners which are of interest to the user and describes the standard methods for measuring these characteristics.
