Rechercher

This National Standard of Canada is equivalent to International Standard ISO 15197:2003. 1 Scope This International Standard specifies requirements for in vitro glucose monitoring systems that measure glucose concentrations in capillary blood samples and procedures for the verification and the validation of performance by the intended users. These systems are intended for self-testing by…

1 Scope 1.1 This Standard specifies the requirements for an environmental qualification (EQ) program for CANDU nuclear power plants (see Figure 1). The program comprises a set of planned and coordinated activities that establishes auditable assurance that the equipment required to perform safety functions will meet or exceed the functional and performance requirements under accident…

1. SCOPE 1.1 This Standard specifies the requirements for factory made rigid expanded polystyrene insulation in the form of pipe covering and boards with or without facings or coatings made by moulding (EPS) or extrusion (XPS) of expandable polystyrene beads. This Standard does not apply to laminated products manufactured with any type of rigid board facer including fibreboard, perlite…

This part of IEC 61241 is intended to be applied by users and covers factors directly related to the inspection and maintenance of electrical installations within hazardous areas only. It does not include conventional requirements for electrical installations, nor the testing and certification of electrical apparatus. This standard supplements the requirements laid down in IEC 60364-6-61. NOTE:…

ISO 10303-108:2005 specifies the resource constructs for the representation of model parameters and constraints in CAD or other kinds of models, together with the mechanisms necessary for associating them with geometric or other elements of transferred models. The use of these capabilities potentially allows certain aspects of the behaviour of a model in its originating system to be conveyed…

ISO 10542-3:2005 specifies design and performance requirements and recommendations, instructions and warnings for both installers and users, and product marking and labelling, for wheelchair tiedown and occupant-restraint systems (WTORS) that use a docking-type wheelchair tiedown. It specifies the universal docking interface geometry (UDIG) and a method of testing wheelchair movement. It is…

ISO/TR 22971:2005 provides users with practical guidance to the use of ISO 5725-2:1994 and presents simplified step-by-step procedures for the design, implementation, and statistical analysis of inter-laboratory studies for assessing the variability of a standard measurement method and on the determination of repeatability and reproducibility of data obtained in inter-laboratory testing.

ISO 16049-2:2005 specifies utilization guidelines and principles to be used in strength calculation methods adequate to guarantee the effectiveness and ultimate load strength of tie-down/lashing arrangements used to restrain cargo on board civil transport aircraft during flight for either cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into…

ISO 15712-3:2005 specifies a calculation model to estimate the sound insulation or the sound pressure level difference of a façade or other external surface of a building. The calculation is based on the sound reduction index of the different elements from which the façade is constructed and it includes direct and flanking transmission. The calculation gives results which correspond approximately…

ISO 15712-4:2005 describes a calculation model for the sound power level radiated by the envelope of a building due to airborne sound inside that building, primarily by means of measured sound pressure levels inside the building and measured data which characterize the sound transmission by the relevant elements and openings in the building envelope. These sound power levels, together with those…