Road transport and traffic telematics — Electronic fee collection — Test procedures for user and fi...
ISO/TS 14907-1:2005 specifies the test procedures of EFC road-side equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is specifically within the realm of EFC application.
The scope of ISO/TS 14907-1:2005 is restricted to systems operating within the radio emission, EMC regulations, traffic and…
Gas analysis — Investigation and treatment of analytical bias
ISO 15796:2005 specifies generic methods for detecting and correcting bias (systematic errors) of analytical procedures for the analysis of gases, using reference gas mixtures or reference analytical procedures, as well as for estimating the correction uncertainty.
The main sources of (and parameters affecting) bias of analytical procedures are instrumental drift (time) and matrix interferences (…
IEC 62346:2005 specifies the characteristics of 50 mm Optical Disc Cartridges (ODC) with a capacity of 730 Mbytes per Cartridge. This regulation covers the logical format of removable 50 mm magneto-optical discs used on digital still cameras, digital movie cameras, electronic albums and similar devices and combinations of these devices that record, play or process the digital data of still…
IEC 62346:2005 specifies the characteristics of 50 mm Optical Disc Cartridges (ODC) with a capacity of 730 Mbytes per Cartridge. This regulation covers the logical format of removable 50 mm magneto-optical discs used on digital still cameras, digital movie cameras, electronic albums and similar devices and combinations of these devices that record, play or process the digital data of still…
Performance Standard for Split-System and Single-Package Central Air Conditioners and Heat Pumps
1 Scope
1.1 General
1.1.1 This Standard applies to
(a) factory-made, air-source, air-sink, split-system, and single-package unitary air conditioners and heat pumps matching assemblies of the type classified in Clause 1.2 and intended for air-conditioning and space-heating applications in buildings;
(b) through-the-wall single-package split-system and small-duct high-velocity central air…
Asphalt Shingles Made From Organic Felt and Surfaced With Mineral Granules / Asphalt Shingles Made F...
1 Scope
1.1 This Standard covers asphalt roofing shingles composed of saturated organic felt or impregnated glass felt, coated on both sides with asphaltic material and surfaced on the weather side with mineral granules. This Standard is designed for the evaluation of products as they are manufactured.
1.2 The shingles covered by this Standard may be
(a) of single or multi-tab design; and
(b)…
Oil-Burning Equipment: Steam and Hot-Water Boilers
1 Scope
1.1
This Standard applies to complete vent (flue)-connected, oil-fired steam, and/or hot-water boilers that are provided with automatic control devices.
1.2 This Standard applies to
(a) boilers intended for residential use having an input of less than 11.5 L/h (3 USGPH), which is approximately equivalent to 117 kW (400 000 Btu/h);
(b) low-pressure boilers intended for commercial…
Lasers and laser-related equipment — Test method and classification for the laser resistance of surg...
ISO 11810-1:2005 is applicable to disposable and reusable, as well as woven and non-woven materials used as surgical drapes and other patient protective covers which claim to be laser resistant.
The purpose of ISO 11810-1:2005 is to provide a standardized method for testing and classifying surgical drapes and other patient protective covers with respect to laser-induced hazards. An appropriate…
