Rechercher

8820-2:2005 gives guidance for the choice and application of automotive fuse-links. It describes the various parameters which have to be taken into account when selecting fuse-links. 8820-2:2005 is intended to be used in conjunction with ISO 8820-1 and the other parts of ISO 8820.

ISO 11199-2:2005 specifies requirements and methods of testing the static stability braking capabilities, static strength and fatigue of rollators being used as walking aids with wheels, manipulated by the hands, without accessories, unless specified in the particular test procedure. ISO 11199-2:2005 also gives requirements relating to safety, ergonomics, performance, and information supplied by…

ISO/IEC 15938-9:2005 collects standard profiles and levels for MPEG-7, specified across all parts of ISO/IEC 15938. While all parts are potential candidates for profiling, current profiles concentrate on the Description definition language [ISO/IEC 15938-2], Visual [ISO/IEC 15938-3], Audio [ISO/IEC 15938-4], Multimedia description schemes [ISO/IEC 15938-5], which are based on the namespace…

ISO/IEC 15938-9:2005 collects standard profiles and levels for MPEG-7, specified across all parts of ISO/IEC 15938. While all parts are potential candidates for profiling, current profiles concentrate on the Description definition language [ISO/IEC 15938-2], Visual [ISO/IEC 15938-3], Audio [ISO/IEC 15938-4], Multimedia description schemes [ISO/IEC 15938-5], which are based on the namespace…

1 Scope 1.1 Scope This Standard specifies requirements for controlling hazardous energy associated with potentially harmful machines, equipment, or processes. When a CSA Standard or other recognized Standard exists for a specific type of machinery, equipment, or process, it should be used with this Standard to provide the most effective protection. 1.2 Purpose The purpose of this Standard is…

1 Scope 1.1 This Standard specifies minimum design and material requirements as well as manufacturing practices and markings for prefabricated septic tanks, sewage holding tanks, and effluent chambers of steel, concrete, fibreglass-reinforced plastic, or polyethylene construction that are designed to handle sewage or sewage effluent. 1.2 This Standard does not purport to address all of the…

1 Scope 1.1 This Standard covers mechanical couplings used to axially join pipes and fittings in non-pressure drain, waste, and vent (DWV) and sewer piping systems that are located inside or outside buildings and above or under the ground. Notes: (1) Caution should be used when installing mechanical couplings at low temperatures. The coupling manufacturer should be consulted. (2) Caution…

1. SCOPE 1.1 This standard applies to two types of automotive low-sulphur (LS) diesel fuel containing low levels of biodiesel esters, Type A-LS, Bx and Type B-LS, Bx. 1.1.1 Bx represents biodiesel fuel containing x percent by volume of biodiesel ester component in the range of 1.0 to 5%. 1.2 Fuel to this standard is intended for use in high-speed diesel engines that require low-sulphur diesel…

ISO 3758:2005 establishes a system of graphic symbols, intended for use in the marking of textile articles, providing information to prevent irreversible damage to the article during the textile care process;specifies the use of these symbols in care labelling. The following domestic treatments are covered: washing, bleaching, drying, ironing, and drying after washing. Professional textile care…

Gives the requirements for four types of heat-shrinkable, flame- retarded, limited-fire-hazard sleeving with a thermal endurance rating of 105 °C as shown below: Class A: thin wall, shrink ratio 2:1, internal diameter up to 102,0 mm Class B: medium wall, shrink ratio 2:1, internal diameter up to 60,0 mm Class C: thick wall, shrink ratio 2:1, internal diameter up to 51,0 mm Class D: medium wall,…