Rechercher

1 Scope 1.1 This Standard specifies the technical requirements for the licensee to ensure structural integrity of cold-worked Zr-2.5 wt% Nb alloy pressure tubes in operating CANDU reactors. Clause 13 of CAN/CSA-N285.0 requires that when in-service inspection results or material surveillance results do not satisfy the requirements of the original inspection program, a fitness-for-service…

This Standard is joint with ASME A112.18.1-2005. 1 Scope 1.1 This Standard applies to plumbing supply fittings and accessories located between the supply line stop and the terminal fitting, inclusive, as follows: (a) automatic compensating valves for individual wall-mounted showering systems; (b) bath and shower supply fittings; (c) bidet supply fittings; (d) clothes washer supply…

This Standard is joint with ASME A112.18.2-2005. 1 Scope 1.1 This Standard covers plumbing waste fittings of sizes NPS-2 and smaller. 1.2 Plumbing supply fittings are covered by ASME A112.18.1/CSA B125.1. 1.3 Other devices, e.g., temperature-actuated in-line mixing valves and flexible connectors under continuous pressure, are covered by CSA B125.3 or other plumbing product Standards…

1 Scope 1.1 This Standard applies to plumbing fittings such as the following: (a) anti-siphon fill valves; (b) automatic compensating valves other than those for individual wall-mounted showering systems; (c) closet and urinal spuds; (d) flexible connectors; (e) flush valves; (f) temperature-actuated in-line mixing valves; (g) flushometer valves and solenoid valves; (h) supply line…

ISO/IEC 22535:2005 specifies tunnelling of "QSIG" over the Session Initiation Protocol (SIP) within a corporate telecommunication network (CN). "QSIG" is a signalling protocol that operates between Private Integrated services Network eXchanges (PINX) within a Private Integrated Services Network (PISN). A PISN provides circuit-switched basic services and supplementary services…

ISO/IEC 22535:2005 specifies tunnelling of "QSIG" over the Session Initiation Protocol (SIP) within a corporate telecommunication network (CN). "QSIG" is a signalling protocol that operates between Private Integrated services Network eXchanges (PINX) within a Private Integrated Services Network (PISN). A PISN provides circuit-switched basic services and supplementary services…

ISO 17356-2:2005 gives the OSEK/VDX specifications for binding the OS (operating system), COM (communications) and NM (network management) of the open interface for embedded automotive applications. It specifies the variables (error codes, status types, etc.) programmable by the user to ensure that implementation of OS, COM and NM are coherent between each other.

ISO 15536-1:2005 establishes the general requirements for the design and development of computer manikins, body templates and manikin systems. It addresses their anthropometric and biomechanical properties, taking into account their usability and restrictions for structural complexity and functional versatility, and is also intended as a guide for the selection of manikins and manikin systems and…

CSA Preface This is the first edition of CSA T568.1, Commercial building telecommunications cabling standard - Part 1: General requirements. It replaces CSA T529-95, Telecommunications Cabling Systems in Commercial Buildings. This Standard is an adoption of the identically titled ANSI/TIA/EIA (American National Standards Institute/Telecommunications Industry Association/Electronic…

1 Scope 1.1 This Standard specifies the minimum design, construction, operation, maintenance, and emergency response requirements for the storage, handling, and dispensing of aviation fuels at aerodromes. 1.2 This Standard specifies requirements for (a) the safety of aerodrome employees and the travelling public; (b) the provision of clean, dry, and on-specification aviation fuel; and (c) the…