Rechercher

ISO 12402-5:2006 specifies the safety requirements for buoyancy aids with a buoyancy of not less than 50 N used in sheltered waters with help and rescue close at hand under such circumstances where more bulky or buoyant devices can impair the user's activity. It applies to buoyancy aids used by adults or children. ISO 12402-5:2006 is not applicable to one-piece suits.

ISO/IEC 14764:2006 describes in greater detail management of the Maintenance Process described in ISO/IEC 12207, including Amendments. It also establishes definitions for the various types of maintenance. ISO/IEC 14764:2006 provides guidance that applies to planning, execution and control, review and evaluation, and closure of the Maintenance Process. The scope of ISO/IEC 14764:2006 includes…

ISO/IEC 14764:2006 describes in greater detail management of the Maintenance Process described in ISO/IEC 12207, including Amendments. It also establishes definitions for the various types of maintenance. ISO/IEC 14764:2006 provides guidance that applies to planning, execution and control, review and evaluation, and closure of the Maintenance Process. The scope of ISO/IEC 14764:2006 includes…

The global automotive industry is increasingly dependent on electronic product data to design and produce vehicles. Because of that dependency, problems with the quality of product data have led to problems in developing and producing products. When its member organisations recognised the problem, the Strategic Automotive product data Standards Industry Group (SASIG) decided the most effective…

This Technical Report provides manufacturers, test houses, safety personnel, and others with practical guidance on methods to perform radiometric measurements or analyses to establish the emission level of laser energy in accordance with IEC 60825-1 (herein referred to as "the standard"). The measurement procedures described in this technical report are intended as guidance for…

1 Scope 1.1 This Standard applies to the following products designed to be employed in accordance with the Canadian Electrical Code, Part I: (a) nonmetallic outlet boxes, conduit, concrete, floor, and pull boxes that do not exceed 1640 mL in volume; (b) nonmetallic device boxes (with or without integral fittings) that do not exceed 1640 mL in volume, except for multiple-gang boxes where each…

1 Scope 1.1 This Standard specifies energy efficiencies for dry-type transformers. The total ownership cost (TOC) methodology is recommended as the means for achieving these energy efficiencies, particularly for electric utilities. This Standard also specifies an optimal method for users other than utilities, based on a modified TOC methodology that meets the conditions of energy cost. Note: See…

1 Scope 1.1 This Standard specifies requirements for concrete paving slabs manufactured from hydraulic cement concrete to be used in the construction of pavement and roof coverings. This Standard includes units with architectural finishes or tactile surfaces. Note: Annex A contains information on efflorescence and recommends methods for its removal. Annex B provides information on the…

1 Scope 1.1 This Standard applies to brick made from fired clay or shale that are intended for use as structural and/or facing components in masonry. It includes testing and other requirements pertaining to freeze-thaw durability, finish, texture, colour, compressive strength, absorption, efflorescence, size, distortion, and out-of-square. Note: See Annex A for information on brick…

1 Scope 1.1 This Standard applies to the lines and equipment associated with underground electric supply and communication systems located entirely outside buildings and fenced supply stations. See CSA C61936-1 for installations within fenced or indoor supply stations. 1.2 This Standard, which forms part of the Canadian Electrical Code, Part III, covers the requirements for the…