Rechercher

ISO 23815-1:2007 establishes required practices for the maintenance of cranes by owners/users.

1 Scope 1.1 This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials…

This PAS is intended to serve as a checklist and guideline for the evaluation of CAx-software for applications within the electromechanical field by users in industry. This PAS provides a set of data element types required in the context of electromechanical applications, especially in the context of electrical applications and their mechanical represen-tations in the real or virtual three-…

ISO/TR 10465-2:2007 presents a comparison of the ATV and AWWA methods for static calculations on underground GRP pipe installations. It is intended that this comparison will encourage the use of both procedures for GRP pipes conforming to International Standards. It is not the intent of ISO/TR 10465-2 to cover all the details of the two methods. Some aspects are, of necessity, very complex, and…

ISO/TR 12767 provides guidance on estimating the flowrate when using pressure differential devices constructed or operated outside the scope of ISO 5167. Additional tolerances or corrections cannot necessarily compensate for the effects of deviating from ISO 5167 (all parts). The information is given, in the first place, to indicate the degree of care necessary in the manufacture, installation…

This part of IEC 60079 applies to users and covers factors directly related to the inspection and maintenance of electrical installations within hazardous areas only, where the hazard may be caused by flammable gases, vapours, mists, dusts, fibres or flyings. It does not apply to underground mining areas, areas where a risk can arise due to the presence of hybrid mixtures, dusts of explosives…

ISO 23559:2007 identifies specific test procedures to assist producers and users in the selection and characterization of thermoplastic films in single- or multi-layer form. It is intended to serve as a guide for those films for which there are no existing standards or specifications. NOTE Because of the range of materials used and the wide variety of processes available to produce…

This technical report has been developed to facilitate the production, supply and use of semiconductor die products, including wafers; singulated bare die; die and wafers with attached connection structures; minimally or partially encapsulated die and wafers. This report contains a questionnaire, based on the requirements of other parts of IEC 62258, which may be used in negotiations and…

ISO 6647-1:2007 specifies a reference method for the determination of the amylose content of milled rice, non-parboiled. The method is applicable to rice with an amylose mass fraction higher than 5 %. ISO 6647-1:2007 can also be used for husked rice, maize, millet and other cereals if the extension of this scope has been validated by the user.

This technical report has been developed to support IEC 61340-5-1. The controls and limits referenced in IEC 61340-5-1 were developed to protect devices that are susceptible to discharges of 100 V or greater using the human body model test method. However, the general concepts are still valid for devices that are susceptible to discharges of less than 100 V. The main changes with respect to the…