Rechercher

ISO 26842-1:2009 gives guidelines for the selection, by means of delamination-resistance tests, of adhesives for use in wood products placed in non-severe environments, indoors or during transport, in which the products are not exposed to extreme changes in temperature and humidity. A series of exposure cycles at various temperatures and humidities is provided to verify that the adhesive selected…

ISO 26842-2:2009 gives guidelines for the selection, by means of delamination-resistance tests, of adhesives for use in wood products placed in severe environments, indoors or during transport, in which the products are exposed to extreme changes of temperature and humidity. A series of exposure cycles at various temperatures and humidities is provided to verify that the adhesive selected, or a…

This National Standard of Canada is equivalent to International Standard ISO/IEC 24754:2008. 1 Scope When a structured document is interchanged between an originator and a recipient, the recipient refers to the style specifications that the originator provides to reconstruct the presentation. However, when the recipient does not have sufficient rendering functionality, it may fail to…

IEC 60401-2:2009 presents a method for defining the designation nomenclature for the major physical attributes of soft ferrite core shapes. The purpose of this standard is to facilitate uniform usage of dimensional characters by manufacturers, specifiers, and users when describing core dimensions on drawings, in tables, and on catalogue specification sheets. This edition includes the following…

Scope 1.1 This Standard provides requirements for materials, reduced temperature performance testing, and labelling for roll-over protective structures (ROPS), falling object protective structures (FOPS), operator protective structures (OPS), and tip-over protective structures (TOPS). It also stipulates requirements for seat belts to be used in conjunction with these systems. 1.2 This Standard…

Scope 1.1 This Standard applies to insulated conductors intended for internal wiring of electrical equipment, for leads of transformers, motors, etc., and for luminous-tube signs and ignition systems, to be installed in accordance with the Canadian Electrical Code, Part I. 1.2 Constructions to which this Standard applies are shown in Tables 1 and 2. The Tables are not a complete summary of the…

Scope 1.1 General This Standard covers wrought steel buttwelding fittings, including extruded headers and factory-produced bends, primarily intended for use in oil or gas pipeline systems. 1.2 Size, grade, and category 1.2.1 Size This Standard covers fittings in sizes from NPS 1/2 to NPS 60. (See Table A.1.) 1.2.2 Grade For other than sour service, this Standard covers fittings from Grade 207…

Scope 1.1 General This Standard covers wrought steel welding neck and blind flanges primarily intended for use in oil or gas pipeline systems. 1.2 Size, grade, nominal pressure class, and category 1.2.1 Size This Standard covers flanges in sizes from NPS 1/2 to NPS 60. (See Table A.1.) 1.2.2 Grade For other than sour service, this Standard covers flanges from Grade 248 to Grade 690. For sour…

Scope 1.1 General This Standard covers steel valves primarily intended for use in oil or gas pipeline systems. The following types of valves are covered: (a) gate valves; (b) plug valves; (c) ball valves; and (d) check valves. 1.2 Size, nominal pressure class, and category 1.2.1 Size This Standard covers valves in sizes from NPS 2 to NPS 60. (See Table A.1.) 1.2.2 Nominal pressure class This…

Scope 1.1 This Standard applies to non-conductive optical fiber cable and conductive optical fiber cable intended to be installed indoors in non-hazardous locations in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard does not cover hybrid optical fiber cables whose construction (excluding the optical fiber component) is covered in other applicable standards of the…