Rechercher

1 Scope 1.1 This Standard specifies kickback performance requirements for gasoline-powered chain saws, 80 cm3 (4.88 in3) engine displacement and smaller, Classes 1A, 1B, and 1C, and electric chain saws, Classes 2A, 2B, and 2C, intended for forestry and other wood-cutting applications, as defined in CSA Z62.1. 1.2 This Standard also specifies kickback performance requirements for…

1 Scope 1.1 This Standard applies to single- or multiple-conductor, round, flat, or coiled appliance wiring material products classified as follows: (a) Class I — internal wiring of equipment (single- or multiple-conductor constructions with or without an insulating covering, covering or jacket): (i) Group A — not subject to mechanical abuse; and (ii) Group B — potentially subject to mechanical…

1 Scope 1.1 This Standard covers the design, qualification, installation, operation, maintenance, inspection, and documentation of the safety systems for a water-cooled nuclear power plant. 1.2 This Standard provides the general requirements for the safety systems. This Standard is a companion document of CSA N290.2 and N290.3, which outline specific requirements. 1.3 In CSA standards, “shall…

1 Scope 1.1 This Standard covers the design, qualification, installation, operation, maintenance, inspection, and documentation of the emergency core cooling (ECC) system for a water-cooled nuclear power plant. 1.2 The ECC system’s primary purpose is to transfer heat from the reactor core following a loss of reactor coolant that exceeds the makeup capability of process systems. This Standard…

1 Scope 1.1 This Standard applies to the containment system of existing and new water-cooled nuclear power plants. Notes: (1) “Existing nuclear power plants” refers to those licensed for operation prior to 2011. (2) The requirements for new builds and existing plants might differ. Where requirements differ for new builds and existing plants, the difference is explicitly stated. 1.2 This…

This International Standard describes test equipment and test procedures for determining the colour stability of photographic colour images when subjected to outdoor conditions. It does not specify limits of acceptability or failure criteria. Instead, it provides means for measuring image changes that take place during the aging of pictorial photographic images and indicates the critical image-…

ISO/IEC TS 29140-1:2011 provides guidance regarding learning, education and training (LET) situations in which learners are nomadic (travel from place to place, from one location to another or require access to services as they travel to different locations). It can be used as a reference by software developers, implementers, instructional designers, and others to ensure that LET environments…

ISO/IEC TS 29140-1:2011 provides guidance regarding learning, education and training (LET) situations in which learners are nomadic (travel from place to place, from one location to another or require access to services as they travel to different locations). It can be used as a reference by software developers, implementers, instructional designers, and others to ensure that LET environments…

IEC 60601-2-31:2008+A1:2011 consists of the second edition (2008) and its amendment 1 (2011). The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. IEC 60601-2-31:2008 applies to the basic safety and essential performance of external pacemakers powered by an internal electrical power source. The minimum safety requirements…

IEC/TS 62351-8:2011(E) covers the access control of users and automated agents to data objects in power systems by means of role-based access control. The scope of this specification covers everything that is needed for interoperability between systems from different vendors.