Competency Standard for diving, hyperbaric chamber, and remotely operated vehicle operations
1 Scope
1.1
This Standard applies to occupational diving, hyperbaric facility, and remotely operated vehicle (ROV)
operations conducted in connection with all types of work and employment and describes the
requirements for minimum competency levels for all personnel directly associated with the identified
techniques of diving or ROV operations.
Canadian safety and health legislation…
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrica...
IEC 60893-3-3:2003+A1:2011 Gives the requirements for industrial rigid laminated sheets for electrical purposes based on melamine resins and different reinforcements. Applications and distinguishing properties are given. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on…
Surface chemical analysis — Scanning-probe microscopy — Measurement of drift rate
ISO 11039:2012 defines terms and specifies measurement methods for characterizing the drift rates of scanning-probe microscopy (SPM) instruments in the X- and Y-directions and, for SPM instruments measuring topography, the drift rate in the Z-direction. Though the behaviour of the long-term drift rate might be nonlinear, both that and the behaviour of the short-term drift rate after a user-…
Air quality — Environmental meteorology — Part 1: Ground-based remote sensing of visual range by lid...
This part of ISO 28902 mainly specifies the requirements in order to perform visual range lidar measurements
for the determination of direction-dependent meteorological optical range (MOR). The term "visual-range lidar"
is used in this part of ISO 28902 to apply to the lidar systems making visual-range measurements, commonly
referred to as "visibility measurements". Due to…
Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classific...
IEC 61340-4-4:2012 specifies requirements for flexible intermediate bulk containers (FIBC) between 0,25 m3 and 3 m3 in volume, intended for use in hazardous explosive atmospheres. The explosive atmosphere may be created by the contents in the FIBC or may exist outside the FIBC. The requirements include:
- classification and labelling of FIBC;
- classification of inner liners;
- specification of…
Building environment design — Indoor environment — Design process for visual environment
ISO 16817:2012 provides an integrated design process for a high-quality indoor visual environment including architectural and engineering aspects of daylighting and artificial lighting for user satisfaction, well-being and productivity as well as the energy performance and sustainability of buildings.
Light emitting diode (LED) equipment for lighting applications
1 Scope
1.1
The requirements specified in this Standard cover light emitting diode (LED) equipment that is an integral
part of a luminaire or other lighting equipment, and which operates in the visible light spectrum between
400 – 700 nm. These requirements also cover the component parts of LED equipment, including LED
controlgear, controllers, arrays, modules, and packages, as defined in this…
1 Scope
1.1
This Standard specifies design, testing, and marking requirements for fall restrict equipment for wood pole
climbing. This equipment is for use by a single worker exposed to the hazard of falling when ascending or
descending, moving around, and working on or from a wood pole.
1.2
In CSA standards, “shall” is used to express a requirement, i.e., a provision that the user is obliged…
