Rechercher

ISO 18104:2014 specifies the characteristics of two categorial structures, with the overall aim of supporting interoperability in the exchange of meaningful information between information systems in respect of nursing diagnoses and nursing actions. Categorial structures for nursing diagnoses and nursing actions support interoperability by providing common frameworks with which to analyse the…

ISO 10282:2014 specifies requirements for packaged sterile rubber gloves intended for use in surgical procedures to protect the patient and the user from cross-contamination. It is applicable to single-use gloves that are worn once and then discarded. It does not apply to examination or procedure gloves. It covers gloves with smooth surfaces and gloves with textured surfaces over part or the…

ISO/TS 19130-2:2014 supports exploitation of remotely sensed images. It specifies the sensor models and metadata for geopositioning images remotely sensed by Synthetic Aperture Radar (SAR), Interferometric Synthetic Aperture Radar (InSAR), LIght Detection And Ranging (lidar), and SOund Navigation And Ranging (sonar) sensors. The specification also defines the metadata needed for the aerial…

ISO/TR 14786:2014 is intended to provide information and analyses in support of the development of chemical nomenclature for the naming of "nano-objects". "Nano-objects" have been defined in ISO/TS 80004‑1:2010 to mean "materials with one, two, or three external dimensions in the nanoscale", with the nanoscale defined as the "size range from approximately 1 nm…

ISO 22400 defines key performance indicators (KPIs) used in manufacturing operations management. ISO 22400-2:2014 specifies a selected number of KPIs in current practice. The KPIs are presented by means of their formula and corresponding elements, their time behaviour, their unit/dimension and other characteristics. ISO 22400-2:2014 also indicates the user group where the KPIs are used, and the…

1 Scope 1.1 This Standard applies to helmets intended to provide head injury risk reduction for recreational alpine skiers and snowboarders. These helmets can also be worn for other non-motorized recreational snow sport activities. This Standard defines the areas of the head that are to be protected for impact injuries. It covers the basic performance requirements for shock absorption,…

1 Scope 1.1 This test method determines the wind uplift resistance of membrane-roofing systems when subjected to dynamic wind load cycles. The test methods are applicable to a) mechanically attached membrane roofing systems; and b) adhered membrane roofing systems. The roofing system consists of a deck and roofing membrane. It includes components such as vapour barriers or retarders,…

1 Scope 1.1 General This Standard specifies requirements for materials and methods for the manufacture, transportation, and installation of architectural, structural, and specialty precast concrete products. Note: This Standard should be specified for precast concrete elements used in segmental construction. 1.2 Shop drawings This Standard specifies the requirements, in addition to those…

1 Scope 1.1 This Standard applies to portable luminaires, intended for use in dry, damp, and wet locations, and intended to be used in accordance with the Rules of the Canadian Electrical Code, Part I, in nonhazardous locations, on a nominal 120 V system and 15 A or 20 A branch circuits, or on the load side of a Class 2, LED Class 2, or safety extra-low voltage (SELV) circuit. 1.2 This…

1 Scope 1.1 This Standard covers component assembly surge protective devices (SPDs) consisting of two or more Type 5 components, intended for use in Type 1, 2, or 3 SPD applications. 1.2 Type 4 component assemblies are designed for repeated limiting of transient voltage surges as specified in this Standard on 50 or 60 Hz power circuits over 42 V and not exceeding 750 V. 1.3 The surge protective…