Rechercher

1.1 This Standard covers electrical safety requirements for 120 V cord-connected single circuit wiring systems for residential and commercial use and for use with free standing interconnected tables, provided with communication, video, and/or power receptacles that are intended for frequent setup and breakdown. 1.2 The requirements apply to powered tables connected to 15 A or 20 A, 120 V (…

1.1 Scope of this Standard This Standard specifies requirements pertaining to the following: (a) definitions; (b) construction; (c) equipment complying with Standards; (d) safety and protection; (e) materials and quality of work; (f) marking; and (g) tests (of a general nature). Such requirements are applicable to all individual Standards of the Canadian Electrical Code, Part II (see…

1 Scope 1.1 This Standard applies to surge protective devices (SPDs) intended for: a) permanently connected applications designed for limiting surge voltages and discharging surge currents; b) use on 50/60 Hz circuits over 42 V and up to 750 V ac; c) installation between the secondary of the service transformer and the line side of the service equipment overcurrent protective device. These…

1 Scope 1.1 This Standard covers the manufacturing process and testing requirements of fibre-reinforced polymer (FRP) wet layup composite systems, pre-cured FRP plates, and FRP bars externally bonded as structural strengthening materials for structures (concrete, steel, wood, and masonry). 1.2 This Standard covers FRPs comprised of a) glass, carbon, or aramid fibres; and b) isophthalic…

1 Scope 1.1 This Standard establishes criteria for emergency preparedness and response for the petroleum and natural gas industry systems. Note: Prevention, continuity, and recovery are not within the scope of this Standard. 1.2 This Standard applies to petroleum and natural gas industry systems (see Figures 1 and 2), including a) pipeline systems handling i) oil; ii) gas; iii) oil-…

ISO 37500:2014 covers the main phases, processes and governance aspects of outsourcing, independent of size and sectors of industry and commerce. It is intended to provide a good foundation to enable organizations to enter into, and continue to sustain, successful outsourcing arrangements throughout the contractual period. ISO 37500:2014 gives guidance on: · good outsourcing governance…

IEC/TR 61292-4:2014(E) which is a technical report, applies to all commercially available optical amplifiers (OAs), including optical fibre amplifiers (OFAs) using active fibres, as well as Raman amplifiers. Semiconductor optical amplifiers (SOAs) using semiconductor gain media are also included. This technical report provides a simple informative guideline on the threshold of high optical power…

IEC 60071-5:2014 provides guidance on the procedures for insulation co-ordination of high-voltage direct current (HVDC) converter stations, without prescribing standardized insulation levels. This standard applies only for HVDC applications in high-voltage a.c. power systems and not for industrial conversion equipment. Principles and guidance given are for insulation co-ordination purposes only.…

IEC 60684-3-284:2014 gives the requirements for heat-shrinkable sleevings for oil barrier, medium voltage cable jointing and termination applications, with nominal shrink ratios of up to 3:1. These sleevings have been found suitable for use up to temperatures of 80 °C. Included are Type A: polyolefin based and Type B: fluoropolymer based, enhanced oil resistance. These sleevings are normally…

IEC 60684-3-284:2014 gives the requirements for heat-shrinkable sleevings for oil barrier, medium voltage cable jointing and termination applications, with nominal shrink ratios of up to 3:1. These sleevings have been found suitable for use up to temperatures of 80 °C. Included are Type A: polyolefin based and Type B: fluoropolymer based, enhanced oil resistance. These sleevings are normally…