PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of...
ISO 11999 specifies minimum design and performance requirements for personal protective equipment (PPE) to be used by firefighters, primarily but not solely to protect against exposure to flame and high thermal loads.
To assist with choice based on user risk assessment, types and performance levels for different categories of protection are included.
The scope of ISO 11999-1:2015 does not include…
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of...
ISO 11999-3:2015 specifies the minimum design and performance requirements for clothing as part of personal protective equipment (PPE) to be used by firefighters, primarily but not solely to protect against exposure to flame and high thermal loads.
To assist with choice based on user risk assessment, a number of levels of protection are included.
ISO 11999-3:2015 describes types, design, and…
Live working – Phase comparators – Part 1: Capacitive type to be used for voltages exceeding 1 kV a....
1 Scope
This part of IEC 61481 is applicable to portable phase comparators of capacitive type to be
used on electrical systems for voltages exceeding 1 kV a.c. and frequencies of 50 Hz and/or
60 Hz.
This standard is applicable to:
?? single-pole phase comparators of capacitive type operating with a memory system up to
36 kV a.c.,
?? two-pole phase comparators of capacitive type operating with a…
Live working – Phase comparators – Part 2: Resistive type to be used for voltages from 1 kV to 36 kV...
1 Scope
This part of IEC 61481 is applicable to portable phase comparators of resistive type to be
used on electrical systems for voltages from 1 kV a.c. to 36 kV a.c. and frequencies of 50 Hz
and/or 60 Hz.
This standard is applicable to phase comparators of resistive type used in contact with the
bare conductive parts to be compared:
?? as a complete device including its insulating element or…
Live working-Electrical insulating sleeves
Travaux sous tension-Protège-bras isolants électriques
1 Scope
This International Standard is applicable to electrical insulating sleeves for the protection of
workers from accidental contact with live electrical conductors, apparatus or circuits.
The products designed and manufactured according to this standard contribute to the safety
of the users provided they are used by skilled persons, in accordance with safe methods of
work and the…
Live working – Electrical insulating gloves
Travaux sous tension – Gants isolants électriques
1 Scope
This International Standard is applicable to electrical insulating gloves and mitts that provide
protection of the worker against electric shock.
Unless otherwise stated, the use of the term “glove” includes both gloves and mitts.
This standard also covers electrical insulating gloves with additional integrated mechanical
protection referred to in this document as “composite gloves”.
The…
1.1
There is a commentary available for this Clause.
This Standard covers the design, construction, operation, maintenance, deactivation, and abandonment
of oil and gas industry pipeline systems that convey
a) liquid hydrocarbons, including crude oil, multiphase fluids, condensate, liquid petroleum products,
natural gas liquids, and liquefied petroleum gas;
b) oilfield water;
c) oilfield…
1.1
This Standard applies to manually operated and mechanically operated special use switches that are
a)
for use on dc, ac/dc, or ac only; and
b)
rated at not more than
i)
60 A at 250 V or less; or
ii)
30 A or 2 hp at 600 V or less
and intended for use in accordance with the Canadian Electrical Code, Part I.
1.2
This Standard does not apply to
a)
switches forming parts either of…
1.1
This Standard applies to electric supply and communication lines and equipment located entirely outside of buildings and fenced supply stations.
1.2
Existing installations (including maintenance replacements and maintenance alterations) meeting the original designs that currently comply with prior editions of this Standard, need not be modified to comply with this edition of the Standard,…
1.1
This Standard specifies design, testing, and marking requirements for manufactured fall arresters and
fixed vertical rigid rails that are used on a vertical or sloped plane.
1.2
The equipment specified in this Standard is intended for use where there is a danger of falling from
heights. In the event of fall, the fall arrester will lock on the fixed vertical rigid rail to arrest the fall…