Rechercher

ISO/TS 17425:2016 specifies the In-Vehicle Signage service and application that delivers In-Vehicle Signage information to ITS stations (vehicle ITS stations or personal ITS stations devices) concerning road and traffic conditions, qualified by road authorities/operators, in a consistent way with road authority's/operator's requirements, in the manner that is coherent with the…

IEC 62689-2:2016 describes electric phenomena and electric system behaviour during faults, according to the most widely diffused distribution system architecture and to fault typologies, to define the functional requirements for fault passage indicators (FPI) and distribution substation units (DSU) (including their current and/or voltage sensors), which are, respectively, a device or a device/…

IEC 60068-3-13:2016 provides background information and guidance for writers and users of specifications for electric and electronic components, containing references to the test standards IEC 60068-2-20, IEC 60068-2-58, IEC 60068-2-69, IEC 60068-2-83, and to IEC 61760-1, which defines requirements to the specification of surface mounting components. This first edition cancels and replaces IEC…

ISO 8528-8:2016 defines design requirements, minimum performances and type tests for low-power generating sets driven by reciprocating internal combustion engines for land and marine use (domestic, recreational and industrial application), excluding generating sets used on aircraft. It concerns mainly low-power generating sets driven by reciprocating internal combustion engines for the generation…

ISO 8528-13:2016 specifies the safety requirements for reciprocating internal combustion (RIC) engine driven generating sets up to 1 000 V consisting of an RIC engine, an alternating current (AC) generator including the additional equipment required for operating, e.g. controlgear, switchgear, auxiliary equipment. It is applicable to generating sets for land and marine use (domestic, recreational…

1.1 This Standard specifies the chassis and body requirements and safety equipment requirements for school buses. It is a manufacturing standard intended to apply to original equipment supplied by the bus manufacturer. Note: The main purpose of this Standard is to provide the safest possible vehicle for students using school buses. It needs to be stressed, however, that standards are not…

1.1 This Standard applies to single-conductor and multi-conductor Type RA90 and RC90 cables having a maximum temperature rating of 90 °C in both dry and wet locations and intended for installation in accordance with CSA C22.1, Canadian Electrical Code, Part I. 1.2 Cables covered in this Standard are intended for use on systems having nominal voltages up to 5000 V, except for 2-conductor,…

1.1 This Standard applies to mineral-insulated cables with copper, nickel/nickel alloy-clad copper, steel-clad copper, or nickel conductors, enclosed in a copper or stainless steel sheath. 1.2 The constructions covered by this Standard are intended for use in power, instrumentation, control, and fire alarm systems that are intended to be installed in ordinary locations in accordance with CSA…

1.1 This Standard applies to household cooking ranges having a rating not exceeding 250 V and 21 kW and designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I. Note: Throughout this Standard, the word “appliance” is used to refer to the whole group of equipment covered by this Standard. Where a requirement applies only to one type of equipment, e.g., an…

1.1 This Standard applies to newly manufactured, unfinished composite wood panels prior to use in construction, finishing, or installation. The composite wood panel categories covered are a) hardwood plywood (HWPW) (including composite and veneer core); b) particleboard (PB); c) medium density fibreboard (MDF); and d) thin MDF. Note: Refer to Clause 3.1 for further clarification. 1.2 This…