Stationary training equipment — Part 9: Elliptical trainers, additional specific safety requirements...
ISO 20957-9:2016 specifies additional safety requirements for elliptical trainers in addition to the general safety requirements of ISO 20957‑1.
ISO 20957-9:2016 specifies safety requirements for cardiovascular equipment with a closed pattern motion and/or a reciprocating motion, where the user's feet are designed to be in contact with the footplatform, but not including steppers, performed…
Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performa...
ISO 374-5:2016 specifies the requirements and test methods for protective gloves intended to protect the user against micro-organisms.
NOTE If other protection features is to be needed, e.g. chemical risks, mechanical risks, thermal risks, electrostatic dissipation etc., the appropriate specific performance standard is to be used in addition. Further information on protective gloves…
Information technology — Automatic identification and data capture techniques — Optical Character Re...
ISO/IEC 30116:2016
- specifies the methodology for the measurement of specific attributes of OCR-B character strings,
- defines a method for evaluating these measurements and deriving an overall assessment of character string quality,
- defines a reference decode algorithm for OCR-B, and
- gives information on possible causes of deviation from optimum grades to assist users in…
Information technology - Automatic identification and data capture techniques - Optical Character Re...
ISO/IEC 30116:2016
- specifies the methodology for the measurement of specific attributes of OCR-B character strings,
- defines a method for evaluating these measurements and deriving an overall assessment of character string quality,
- defines a reference decode algorithm for OCR-B, and
- gives information on possible causes of deviation from optimum grades to assist users in…
1.1
This Code sets out the minimum provisions for the installation, extension, alteration, and renewal of
hydronic heating systems.
1.2
This Code applies to open and closed hydronic heating systems. These systems include
a) hydronic space heating;
b) radiant heating (wall, floor, ceiling);
c) convectors;
d) fan coils;
e) combination potable water heating and space heating (combo) systems…
1.1 General
This Standard applies to the protection of workers from the hazards arising from the use of mobile or stationary machinery. It provides the criteria to be observed and the description, selection, and application of guards and protective devices. Where a current CSA Standard exists for a specific type of machinery (e.g., CSA B167, CAN/CSA-B354.2, CSA M424.1, CSA Z142, CAN/CSA-Z248,…
1.1
This Standard applies to high density polyethylene (HDPE) conduit, HDPE conduit with conductors, and fittings, intended for use at a continuous operating temperature of 75 °C or 90 °C, for installation in accordance with the Rules of the Canadian Electrical Code, Part I, for direct burial or encasement in concrete or masonry in ordinary (non-hazardous) locations.
1.2
The fittings covered…
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measur...
ISO 10360-12:2016 specifies the acceptance tests for verifying the performance of an articulated arm CMM by measuring calibrated test lengths as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the articulated arm CMM. It applies to articulated arm CMMs using tactile probes and optionally optical distance…
Recommendations for renewable energy and hybrid systems for rural electrification - Part 9-3: Integr...
IEC TS 62257-9-3:2016(E) specifies the general requirements for the design and the implementation of the interface equipment within the user's installation which connects to a microgrid or the generating part of a standalone system. It applies to simplified user's interfaces (distribution board) in electrical installations with maximum power of 500 VA in decentralized rural…
Recommendations for renewable energy and hybrid systems for rural electrification - Part 9-4: Integr...
IEC TS 62257-9-4:2016(E) specifies the general requirements for the design and the implementation of a user's installation. It applies to single phase user's electrical installations with maximum power of 500 VA, in decentralized rural electrification systems. It is applicable to installations supplied by an AC microgrid and to installations encompassing their own single-unit AC…
