Rechercher

This document defines a process reference model for the domain of quality management. The model specifies a process architecture for the domain and comprises a set of processes. Each process is described in terms of process purpose and outcomes. NOTE Users of this document can freely reproduce the detailed descriptions contained in this process reference model as part of any tool or other…

This document specifies the minimum performance requirements and methods of test for personal protective equipment (PPE), gloves, that cover the hands whilst wildland firefighting. This document covers the general design of the PPE, the minimum levels of performance for the materials employed and the methods of test used. This PPE is not intended to provide protection during fire entrapment. A…

1 Scope 1.1 This Standard applies to gas convenience outlets, hereinafter referred to as gas outlets and optional enclosures, not to exceed 1-1/2 in (38.1 mm) and pressures not to exceed 5 psi (34.5 kPa), capable of operation at temperatures between 32 °F and 200 °F (0 °C and 93.3 °C) if intended for indoor use only, or between –20 °F and 200 °F (–28.8 °C and 93.3 °C) if intended for indoor/…

1 Scope 1.1 This Standard applies to newly produced gas selector devices (see Clause 3), herein after referred to as a “device”, constructed entirely of new, unused parts and materials. 1.2 The device may include functions such as selection of type of gas to operate the appliance and main burner primary air adjustment. The device may also contain multiple passageways that can be selected to…

1 Scope 1.1 Inclusions of the Standard 1.1.1 Purpose of this Standard The purpose of this Standard is to provide compliance criteria and guidance on the design of flood- resilient new residential communities as it relates to greenfield development only. 1.1.2 Building types This Standard is applicable to the following building types: a) detached homes; b) semi-detached homes; c) row…

1 Scope 1.1 This Standard provides requirements for the performance, testing, and marking of hand-held barbecue grill brushes and replacement heads with metal bristles for consumer use, intended to clean cooking surfaces of barbecue grills. 1.2 This Standard does not cover the effectiveness of barbecue grill brushes to clean cooking surfaces of barbecue grills. 1.3 This Standard does not…

1 Scope 1.1 This Standard describes methods for the preparation of low-basis weight handsheets of cellulose filaments (CF) and CF-reinforced pulp handsheets to be used for physical tests. 1.2 This Standard also covers the preparation of low-basis weight handsheets of cellulose microfibrils (CMF) and cellulose nanofibrils (CNF), and CMF- or CNF-reinforced pulp handsheets, provided that…

1 Scope 1.1 This Standard establishes steady-state voltage operating ranges at point of connection for AC power systems in Canada. It serves to provide guidance a) to national committees on utilization and control equipment for establishing standard ratings of such equipment on a basis coordinated with power system voltages; b) to power system designers so that new systems will be designed…

1 Scope 1.1 This Standard provides requirements for the planning, design, construction, commissioning, operation, and maintenance of HVAC systems in HCFs. In general, these requirements are more stringent than those applied to non-health care facilities. Note: See Annex A for general guidelines on HVAC system design. Table 1 provides specific design parameters for HVAC systems. 1.2 This…

This document specifies the necessary dimensions to permit the installation of passenger lifts of class I, II, III and VI. These dimensions reflect the requirements for the apparatus. This document is applicable to all new lift installations, irrespective of drive systems, including a car with one entrance, to be installed in a new building. However, for arrangements with counterweight at the…