Rechercher

1 Scope This document provides guidelines to follow during the acquisition process of slap tenprints in order to obtain fingerprints of the best quality possible within acceptable time constraints. Non-cooperative users are out of the scope of this document. When using ten-fingerprint sensors, it is fundamental to know how to use them and how to proceed with the acquisition. This document…

1 Scope This part of ISO/IEC 20071 provides recommendations for describing audiovisual content in an auditory modality for use in recorded video presentations, broadcast television, cinema, live or recorded drama, museum and art gallery exhibits, heritage tours, news, and comedies, regardless of the language and technology being used to transmit and present the recorded or live audiovisual…

1 Scope This document specifies the concepts, framework, test methods, and criteria required to test conformity of biometric products claiming conformance to BioAPI (see ISO/IEC 19784-1). Guidelines for specifying BioAPI conformance test suites, writing test assertions, and defining procedures to be followed during the conformance testing are provided. This document is concerned with…

1 Scope 1.1 This Standard sets forth characteristics of effective and durable installation methods, in both new and existing buildings, of fenestration products within the scope of AAMA/WDMA/CSA 101/I.S.2/A440 that are intended for installation in buildings of all occupancies to which NBC Parts 3, 4, 5, and 6 of Division B apply. 1.2 In addition to fenestration products within the scope of…

1 Scope 1.1 This Standard specifies mechanical and electrical requirements for dispensers of compressed hydrogen gas intended for fuel storage systems integral to fuel cell vehicles at pressures of 25, 35, 50, and 70 MPa. Dispensing systems covered by this Standard include a) HGV dispensers that integrate all dispensing system components in a single unit, including fuel metering and…

1 Scope 1.1 This Standard specifies the design, installation, operation, and maintenance of site-built and modular gaseous hydrogen fuelling stations (HFS) intended to fuel on-road vehicles. 1.2 Unless otherwise stated, the standard conditions are as follows: temperature 15 °C and pressure 101 kPa. 1.3 In case of conflict between this Standard and federal, provincial, state, or local…

This document — is a profile of ISO 19157; — establishes a set of data quality elements and measures for describing the quality of address data; — describes procedures for reporting data quality; — provides guidelines for the use of the established set of data quality elements and measures for describing the quality of address data. This document can be used by…

This document specifies requirements for five types of spiral-wire-reinforced hydraulic hoses and hose assemblies of nominal size from 6,3 to 51. They are suitable for use with: — oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C for types 4SP and 4SH hoses and from −40 °C to +120 °C for types R12, R13 and R15 hoses…

This practice covers the preparation and use of semiadiabatic calorimetric dosimetry systems for measurement of absorbed dose and for calibration of routine dosimetry systems when irradiated with electrons for radiation processing applications. The calorimeters are either transported by a conveyor past a scanned electron beam or are stationary in a broadened beam. This document is one of a set of…

This document provides principles and requirements for safe handling and storage of solid biofuels pellets in commercial and industrial applications. This document is using a risk-based approach to determine what safety measures should be considered. Facilities with a storage capacity <100 t are covered by ISO 20023. Generally, for end-user facilities with a storage capacity of <1 000 t,…