Rechercher

1 Scope 1.1 General This Standard covers drinking water treatment systems that are a) point-of-use or point-of-entry plumbed-in systems; and b) point-of-use non-plumbed-in systems. Note: Drinking water treatment systems covered by this Standard are intended to be used for the reduction or inactivation of harmful substances that can be present in drinking water. 1.2 Electrical requirements…

1 Scope 1.1 This Standard specifies requirements for evaluating adhesives used to bond solid wood materials in structural wood products designed for exterior applications. Note: See Annex C for additional information on exterior exposure and other moisture exposure categories for structural wood adhesives. 1.2 This Standard specifies requirements for evaluating the resistance of adhesives to…

1 Scope 1.1 This Standard specifies requirements for the selection, use, and application of active fall-protection equipment and systems as well as information on selection and use of post-fall rescue equipment, plans, and procedures. 1.2 The purpose of this Standard is to provide criteria and considerations for the safe selection and use of active fall-protection equipment and systems. 1.3…

1 Scope 1.1 General This Standard applies to the reporting of information regarding the conducting of eDNA biological surveys or assessments. This Standard provides a) definitions for terms that are routinely used in the description of eDNA studies; and b) minimum reporting requirements for eDNA studies in a quality assurance/quality control context, including the following: i) survey…

This document specifies in-vehicle Ethernet transport layer and network layer conformance test plans (CTP) for electronic control units (ECUs). This document is a collection of all conformance test cases which are recommended to be considered for automotive use and should be referred by car manufacturers within their quality control processes. The document includes conformance test plans for the…

This document specifies the general and dimensional requirements for the design and performance of flange hose fittings, made of carbon steel, for nominal hose inside diameters of 12,5 mm to 76 mm inclusive, in accordance with ISO 4397, for use with ports and clamps in accordance with ISO 6162‑1 and ISO 6162‑2. Note 1      Materials other than carbon steel can be supplied as agreed between the…

This Recommendation | International Standard specifies the framework, concepts, methodology for testing, and criteria to be achieved to claim compliance to Rec. ITU-T T.800 | ISO/IEC 15444-1 or Rec. ITU-T T.814 | ISO/IEC 15444-15. It provides a framework for specifying abstract test suites (ATSs) and for defining the procedures to be followed during compliance testing. This Recommendation |…

This Recommendation | International Standard specifies the framework, concepts, methodology for testing, and criteria to be achieved to claim compliance to Rec. ITU-T T.800 | ISO/IEC 15444-1 or Rec. ITU-T T.814 | ISO/IEC 15444-15. It provides a framework for specifying abstract test suites (ATSs) and for defining the procedures to be followed during compliance testing. This Recommendation |…

IEC TR 60919-3:2009+A1:2016+A2:2021 provides general guidance on the dynamic performance of high-voltage direct current (HVDC) systems. Dynamic performance is meant to include those events and phenomena whose characteristic frequencies or time domain cover the range between transient conditions and steady state. Diode valves are not considered in this specification. This report (IEC 60919-3)…

IEC 60730-2-8:2018+A1:2021 applies to electrically operated water valves for use in, on or in association with equipment for household and similar use, including heating, air-conditioning and similar applications. The equipment can use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This document is applicable to electrically operated water valves for…