Rechercher

The purpose of ISO/TS 16843-2:2015 is to specify categorial structures within the subject field of acupuncture by defining a set of domain constraints for use within terminological resources. This Technical Specification describes a concept system detailing domain constraints of sanctioned characteristics, each composed of a semantic link and an applicable characterizing category. The potential…

This International Standard is applicable to radiation shielding design and evaluation work for medical proton accelerators with nominal energies of the beam ranging from 70 MeV to 250 MeV, with subsystem such as beamlines, energy selection system (for cyclotron) and nozzle components. The radiation protection requirements and recommendations given in this international standard cover the…

This part of ISO17123 specifies a field procedure for the verification that a given Global Navigation Systems (GNSS) -based system and measurement procedure meets a required measurement uncertainty at the location and time of interest. The field procedure uses three-dimensional coordinates which are compared to reference coordinates. It is designed to be applicable to the technically versatile…

This proposal is the first of three separate, but linked, proposals. The deliverable consists of documentation that defines the processes and models for data exchange in agricultural irrigation. The scope of the set of three proposals is based on two major irrigation data processes: 1. Observations: The field, atmospheric, plant, or other in situ measurements that apply to irrigation management…

This proposal is the third of three separate, but linked, proposals. The deliverable consists of documentation that defines the processes and models for data exchange in agricultural irrigation. The scope of the set of three proposals is based on two major irrigation data processes: 1. Observations: The field, atmospheric, plant, or other in situ measurements that apply to irrigation management…

This proposal is the third of three separate, but linked, proposals. The deliverable consists of documentation that defines the processes and models for data exchange in agricultural irrigation. The scope of the set of three proposals is based on two major irrigation data processes: 1. Observations: The field, atmospheric, plant, or other in situ measurements that apply to irrigation management…

This document specifies general safety and performance requirements for design and testing as well as sustainability considerations for non-sewered sanitation systems (NSSS). A NSSS, for the purposes of this document, is a prefabricated integrated treatment unit, comprising frontend (toilet facility) and backend (treatment facility) components that a) collects, conveys, and fully treats the…

ISO 13341:2010 specifies the procedures to be followed when connecting cylinder valves to gas cylinders. It specifically applies to all valve and cylinder combinations connected with ISO screw threads as specified in ISO 10920 and ISO 11363-1. It defines routines for inspection and preparation prior to valving for both taper and parallel screw threads. Torque values are given for steel and…

This standard will specify a large-scale fire test method for measuring the heat release rates (HRR) and the smoke-production rates (SPR) of wall systems. The fire scenario covered in this document is representative of severe fires originating in near wall or corner locations of an exterior or interior wall construction. Severe fire exposure to wall systems, on the order of 100 kW/m2 heat flux,…

This standard specifies the constructional and performance requirements and methods of tests for LED Destination Board System (LEDDBS) for use in all categories of buses and coaches (including mini/midi buses).