Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
ISO 7396-1:2016 specifies requirements for design, installation, function, performance, testing, commissioning and documentation of pipeline systems used in healthcare facilities for the following:
- oxygen;
- nitrous oxide;
- medical air;
- carbon dioxide;
- oxygen/nitrous oxide mixtures (see Note 1);
- helium/oxygen mixtures;
- (*) oxygen 93;
- gases and gas mixtures classified as medical…
Ventilation systems for nuclear facilities — In-situ efficiency test methods for iodine traps with s...
The standard ISO 16659-1 is the general part of a set of standards on the different in-situ test methods for iodine traps, describing common general provisions applicable to all methods.
The current standard ISO 16659-2 presents the in-situ testing method for measuring the efficiency of iodine traps using a radioactive methyl iodine method (CH3I). This standard present the specific provisions…
Ventilation systems for nuclear facilities — In-situ efficiency test methods for iodine traps with s...
This proposed standard is recommended a method for determining the performances and leak tightness of iodine adsorbers in nuclear air cleaning systems of personnel habitable spaces of nuclear facilities to solve the radiation safety and environmental safety problems of traditional test methods. The test flowchart and evaluation procedure of the cyclohexane method are given in the attachments of…
General requirements for cyber-physically controlled smart machine tool systems (CPSMT) — Part 4: Re...
This document specifies an implementation architecture (IA) of CPSMT for implementing functional architecture (FA) given in ISO 23704-2 including
- Implementation architecture for CPCM,
- Implementation architecture for CSSM and
- Interface architecture of CPSMT.
This document provides an implementation guideline (IG) of CPSMT including
- Information model of CPSMT for CPCM and CSSM,
-…
Aerospace fluid systems — Test methods for tube/fitting assemblies
The test methods specified apply to fitting assemblies used in aircraft fluid systems in the pressure and temperature ranges covered by pressure classes B, D and E, and temperature types I, II and III of ISO 6771. Applies each time that it is referred to in a procurement specification or other definition document which contain the pass/fail criteria for these tests.
This document specifies the basic dimensions and tolerances, in millimetres of trombone head punches.
This document gives examples of materials and their hardness, and specifies the designation of punches in accordance with this document.
These punches are available with shank diameters, D, from 4 mm to 20 mm.
The main use of the punches specified in this document is for punching holes in steel…
Electronic Fee Collection (EFC) — Application interface definition between DSRC-OBE and external in-...
This document defines an application interface between DSRC-based OBE (hereinafter referred to as "DSRC-OBE") and an external in-vehicle device (hereinafter referred to as "the external device") to make DSRC-OBE applicable for diversified external devices.
NOTE For use in autonomous tolling and DSRC-based (CEN, UNI, ARIB, TTA and GB/T) electronic fee collection (EFC)…
Electronic fee collection — Guidelines for security protection profiles
ISO/TS 17574:2017 provides guidelines for preparation and evaluation of security requirements specifications, referred to as Protection Profiles (PP) in ISO/IEC 15408 (all parts) and in ISO/IEC TR 15446.
By Protection Profile (PP), it means a set of security requirements for a category of products or systems that meet specific needs. A typical example would be a PP for On-Board Equipment (OBE) to…
Condition Monitoring and Diagnostics of Machine Systems — Requirements for training and certificatio...
This document reflects on the qualification of personnel performing Optical Gas Imaging (OGI) for
fugitive emissions. The intention is to add a sub-category to ISO 18436 for this specific purpose as OGI
requires a set of skills that is different than the traditional infrared condition monitoring. The skill set
includes many similarities between traditional condition monitoring, such as system and…
Systems and software engineering — Life cycle profiles for very small entities (VSEs) — Part 5-6-1: ...
ISO/IEC 29110:2015 is applicable to Very Small Entities (VSEs). VSEs are enterprises, organizations, departments or projects having up to 25 people. The lifecycle processes described in the set of International Standards (IS) and Technical Reports (TR) are not intended to preclude or discourage their use by organizations bigger than VSEs.
ISO/IEC 29110:2015 provides the management and engineering…
