Rechercher

1 Scope The scope of this Recommendation | International Standard is to provide guidelines supporting the implementation of information security controls in telecommunications organizations. The adoption of this Recommendation | International Standard will allow telecommunications organizations to meet baseline information security management requirements of confidentiality, integrity,…

1 Scope This document establishes terminology for digital twin (DTw) and describes concepts in the field of digital twin, including the terms and definitions of digital twin, concepts of digital twin (e.g. digital twin system context, life cycle process for digital twin, types of digital twin), functional view of digital twin, and digital twin stakeholders. This document can be used in the…

1.1 Scope The scope of this standard is to define one medium access control (MAC) and several physical layer (PHY) specifications for wireless connectivity for fixed, portable, and moving stations (STAs) within a local area.

1 Scope 1.1 This Standard applies to spas, hot tubs, cold tubs, and associated equipment intended for residential and commercial use indoors or outdoors in nonhazardous locations, installed in accordance with the Rules of the Canadian Electrical Code, Part I, and connected a) permanently to an electrical circuit of 250 V or less (i.e., a maximum of 150 volts-to-ground); or b) by a factory-…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of sealed (hermetic and semi-hermetic type) MOTORCOMPRESSORS, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to MOTOR-COMPRESSORS tested…

1 Scope This clause of Part 1 is replaced by the following. BATTERY-OPERATED APPLIANCES and other d.c. supplied appliances are within the scope of this standard. Dual supply appliances, either mains-supplied or battery-operated, are regarded as BATTERY-OPERATED APPLIANCES when operated in the battery mode. This International Standard deals with the safety of electric shavers, hair clippers…

1 Scope 1.1 This Standard applies to single-polarity connectors for use with all alloys of copper or aluminum, or copper-clad aluminum conductors, or all three, for providing contacts between current-carrying parts, in accordance with the Canadian Electrical Code, Part I, CSA C22.1, in Canada, the National Electrical Code, NFPA 70, in the United States of America, or the Standard for…

1 Scope 1.1 This Standard applies to single- and multi-conductor Type TECK 90 armoured cable intended for installation in accordance with the Canadian Electrical Code, Part I, on systems having nominal voltages of 5000 V and less and having a maximum temperature rating of 90 °C in both dry and wet locations. 1.2 In this Standard, “shall” is used to express a requirement, i.e., a provision…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of outdoor barbecues for household and similar use, their rated voltage being not more than 250 V. Appliances not intended for normal household use but that nevertheless can be a source of danger to the public, such as appliances intended to be used by laymen in shops, restaurants,…

This document specifies a unified logical data model based on available existing dynamic information standards. The data has precise relative location references to be linked with ISO/TS 22726-1 which specifies the architecture and the logical data model of static map data for connected and automated driving applications. Dynamic event data comes from external systems and has been defined and…