Rechercher

IEC/TS 62657-2:2011(E) specifies the fundamental assumptions, concepts, parameters, and procedure for wireless communication coexistence. It provides guidelines, requirements, and best practices for wireless communications' availability and performance, covering the life cycle of wireless communication coexistence to help the work of all persons involved with the relevant responsibilities to…

1 Scope 1.1 General 1.1.1 This Standard describes essential elements and specific requirements for the planning, design, and construction of health care facilities (HCFs), both public and private. It applies to all facilities providing health care services regardless of type, size, location, or range of services, including (a) acute care hospitals; (b) inpatient continuing care hospitals; (c)…

1 Scope 1.1 General 1.1.1 This Standard provides guidelines for the commissioning of buildings and all related building systems. It applies to new construction and to renovations of existing facilities. It does not apply to operational commissioning of equipment and systems installed by the owner or others. 1.1.2 This Standard is intended to assist the commissioning team in the…

1 Scope This part of IEC 61400 specifies additional requirements for assessment of the external conditions at an offshore wind turbine site and it specifies essential design requirements to ensure the engineering integrity of offshore wind turbines. Its purpose is to provide an appropriate level of protection against damage from all hazards during the planned lifetime. This standard focuses on…

CISPR 18-2:2010(E), which is a technical report, applies to radio noise from overhead power lines and high-voltage equipment which may cause interference to radio reception. The frequency range covered is 0,15 MHz to 300 MHz. A general procedure for establishing the limits of the radio noise field from the power lines and equipment is recommended, together with typical values as examples, and…

1 INTRODUCTION TO THE GUIDELINE 1.1 Need for this Guideline Engineering projects in the North often encounter permafrost in their foundation environment. The ability of frozen ground to support these structures depends mostly on local climatic conditions, ground temperatures, soil/rock material properties, and ground ice conditions. Since significant climate warming is anticipated in…

IEC 61400-3:2009 specifies additional requirements for assessment of the external conditions at an offshore wind turbine site and specifies essential design requirements to ensure the engineering integrity of offshore wind turbines. Its purpose is to provide an appropriate level of protection against damage from all hazards during the planned lifetime. Focuses on the engineering integrity of the…

This National Standard of Canada is based on International Standard ISO 19902:2007. Scope This International Standard specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: - caissons, free-standing and braced; - jackets; - monotowers; - towers. In addition, it is applicable…

This part of IEC 60825, which is a technical report, gives guidance on the planning and design, set-up and conduct of laser displays and shows that make use of high power lasers. The laser power needed to produce effective theatrical or artistic displays in large spaces such as theatres, arenas, or architectural sites is great enough to pose a severe accidental exposure hazard, even when personal…

ISO 18589-2:2007 specifies the general requirements, based on ISO 11074 and ISO/IEC 17025, for all steps in the planning (desk study and area reconnaissance) of the sampling and the preparation of samples for testing. It includes the selection of the sampling strategy, the outline of the sampling plan, the presentation of general sampling methods and equipment, as well as the methodology of the…