Rechercher

This National Standard of Canada is equivlent to International Standard IEC 61010-2-051:2003, second edition. 1 Scope and object This clause of Part 1 is applicable except as follows: 1.1 Scope Replacement: Replace the whole text by the following new paragraph: This part of IEC 61010 is applicable to electrically operated laboratory equipment and its accessories for mechanical mixing and…

This National Standard of Canada is equivalent to International Standard IEC 61010-2-061:2003, second edition. 1 Scope and object This clause of Part 1 is applicable except as follows: 1.1 Scope 1.1.1 Equipment included in scope Replacement: This part of IEC 61010 applies to electrically powered laboratory atomic spectrometers with thermal atomization. NOTE 1 Examples include atomic…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-081:2001, first edition. 1 Scope and object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This part 2 applies to automatic and semi-automatic laboratory equipment for analysis and other purposes. Automatic and semi-automatic laboratory equipment consists of instruments or…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-101:2002, first edition. 1 Scope and object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This part 2 applies to equipment intended for in vitro diagnostic (IVD) medical purposes, including self-test IVD medical purposes. IVD medical equipment, whether used alone or in…

1 Scope 1.1 General This Standard specifies requirements for (a) mortar for use in bedding, jointing, and bonding of masonry units; and (b) grout for use in filling core, cell, or cavity space in unit masonry construction. Notes: (1) The term "unit masonry" refers to masonry construction using clay (shale), calcium silicate (sand-lime), or concrete masonry units, with individual…

ISO 20340:2003 deals with the performance requirements for the protection, by protective paint systems, of new offshore and related structures exposed to the offshore atmosphere, as well as those immersed in sea or brackish water. ISO 20340 can also be used for other structures, provided that the selected paints or protective paint systems comply with this International Standard. This…

ISO 4628-7:2003 describes a method suitable, in particular, for rating the degree of chalking on white or coloured exterior coatings and coating systems on rough surfaces (i.e. those having a roughness greater than segment 4 of reference comparator G as described in ISO 8503-1). The test method specified may also be used for the assessment of the degree of chalking of coatings and coating systems…

Specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of specimens made from plastics and other non-metallic materials, as well as their resistance to burn-through when exposed to a flame ignition source of 500 W nominal power. This method is applicable to both solid materials and cellular plastic materials having an apparent density of 250 kg/m3 or…

Specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other non-metallic materials, exposed to a small-flame ignition source of 50 W nominal power. These test methods determine the linear burning rate and the afterflame/afterglow times, as well as the damaged length of specimens.…

1. SCOPE 1.1 This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-year storage in a laboratory environment and provides means for its prediction based on an accelerated laboratory test. 1.2 This procedure, based on ASTM standard test methods C 1303 and C 518, can be applied to a wide range of preformed as well as field applied…