Rechercher

This National Standard of Canada is equivalent to International Standard IEC 61010-2-061:2003, second edition. 1 Scope and object This clause of Part 1 is applicable except as follows: 1.1 Scope 1.1.1 Equipment included in scope Replacement: This part of IEC 61010 applies to electrically powered laboratory atomic spectrometers with thermal atomization. NOTE 1 Examples include atomic…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-081:2001, first edition. 1 Scope and object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This part 2 applies to automatic and semi-automatic laboratory equipment for analysis and other purposes. Automatic and semi-automatic laboratory equipment consists of instruments or…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-101:2002, first edition. 1 Scope and object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This part 2 applies to equipment intended for in vitro diagnostic (IVD) medical purposes, including self-test IVD medical purposes. IVD medical equipment, whether used alone or in…

Provides guidance on the factors which affect the toxic hazard from fires involving electrotechnical products, and provides information on the methodologies recommended by ISO TC 92 (SC 3) for estimating and reducing toxic hazard from fires, as expressed in ISO/TR 9122 (Parts 1 to 6), ISO 13344 and ISO/TS 13571. There is no single test to realistically assess toxic hazard in fires. Small-scale…

ISO 16603:2004 describes a laboratory test method for measuring the penetration resistance of clothing materials to blood and body fluids. This test method uses a synthetic blood in continuous contact with the material specimen at specified set of conditions using the ISO 13994 test apparatus. This test method is not always effective in testing protective clothing materials having thick, inner…

ISO 16604:2004 describes a laboratory test method for measuring the resistance of materials used in protective clothing to penetration by blood-borne pathogens. This test method uses a surrogate microbe under conditions of continuous liquid contact. Protective clothing "pass/fail" determinations are based on the detection of viral penetration at a specific hydrostatic pressure using the…

1 Scope 1.1 General This Standard specifies requirements for (a) mortar for use in bedding, jointing, and bonding of masonry units; and (b) grout for use in filling core, cell, or cavity space in unit masonry construction. Notes: (1) The term "unit masonry" refers to masonry construction using clay (shale), calcium silicate (sand-lime), or concrete masonry units, with individual…

Concerns laboratory tests used to measure the toxic components of the fire effluent from either electrotechnical products or materials used in electrotechnical products. It provides guidance on the use and interpretation of results from such tests. It discusses currently available approaches to toxic hazard assessment consistent with the approach of ISO TC 92 SC 3, as set out in ISO/TR 9122…

Specifies test methods for determining the electrical resistance of all types of floor coverings and installed floors with resistance to ground, point-to-point resistance and vertical resistance of between 104 W and 1013 W. Laboratory evaluations carried out under controlled environmental conditions can be used for classification or quality control purposes. Tests on installed floors under…

CAN/CSA-A3001-03 Cementitious Materials for Use in Concrete 1 Scope 1.1 This Standard addresses the following aspects of various cementitious materials: a) their definitions; b) their chemical, physical, and uniformity requirements; c) the tests required; d) the procedures for inspection and sampling; and e) the units of measurement, packaging, marking, and storage. 1.2 The various…