Rechercher

ISO 13347-4:2004 applies to industrial fans as defined in ISO 5801 and ISO 13349. It is limited to the determination of airborne sound emission for the specified set-ups. Vibration is not measured, nor is the sensitivity of airborne sound emission to vibration effects determined. The sizes of the fan, which can be tested in accordance with ISO 13347-4:2004, are limited only by the practical…

ISO 13347-3:2004 applies to industrial fans as defined in ISO 5801 and ISO 13349. It is limited to the determination of airborne sound emission for the specified set-ups. Vibration is not measured, nor is the sensitivity of airborne sound emission to vibration effects determined. The sizes of fan which can be tested in accordance with ISO 13347-3:2004 are limited only by the practical aspects of…

ISO 17313:2004 specifies a test method for laboratory measurement of the hydraulic conductivity of water-saturated porous materials using a flexible wall permeameter. ISO 17313:2004 is applicable to undisturbed or compacted specimens that have a hydraulic conductivity between 1 x 10-5 m/s (1 x 10-3 cm/s) and 1 x 10-11 m/s (1 x 10-9 cm/s). Typical soil types falling in this category are clay, clay…

Establishes a common and reproducible reference for evaluating the immunity of electrical and electronic equipment when subjected to electrical fast transient/bursts on supply, signal, control and earth ports. The test method documented in this part of IEC 61000-4 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. The standard defines…

ISO 11275:2004 specifies a laboratory method for the simultaneous determination in soils of the unsaturated hydraulic conductivity and of the soil water-retention characteristic. It is applicable only to measurement of the drying or desorption curve. Application of the method is restricted to soil samples which are, as far as possible, homogeneous. The method is not applicable to soils which…

This National Standard of Canada is based on International Standard IEC 61010-1:2001, and is common with UL 61010-1. 1 Scope and object 1.1 Scope 1.1.1 Equipment included in scope This part of IEC 61010 specifies general safety requirements for electrical equipment intended for professional, industrial process, and educational use, any of which may incorporate computing devices, as defined in…

This National Standard of Canada is equivalent to International Standard IEC 61010-2-010:2003, second edition, 2003. 1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the text by the following: This part of IEC 61010 applies only to electrically powered laboratory equipment for the heating of materials, where the…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-032:2002, second edition. 1 Scope and object This clause of part 1 is applicable, except as follows: 1.1 Scope Replacement: This International Standard applies to the HAND-HELD and hand-manipulated CURRENT SENSORS described below. These CURRENT SENSORS are for use in the measurement of current without…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-045:2000, first edition. 1 Scope and object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This International Standard applies to WASHER DISINFECTORS and other equipment incorporating washing and disinfection processes for the treatment of soiled items used in the medical,…

This National Standard of Canada is equivlent to International Standard IEC 61010-2-051:2003, second edition. 1 Scope and object This clause of Part 1 is applicable except as follows: 1.1 Scope Replacement: Replace the whole text by the following new paragraph: This part of IEC 61010 is applicable to electrically operated laboratory equipment and its accessories for mechanical mixing and…