Rechercher

ISO 18589-1:2005 specifies the general requirements to carry out radionuclides tests on soil sample, including sampling. ISO 18589-1:2005 is addressed to people responsible for determining the radioactivity present in soils for the purpose of radiation protection. This may concern soils from gardens and farmland, urban or industrial sites, as well as soil not affected by human activities. ISO…

ISO/TS 22476-10:2005 specifies laboratory test methods to establish the effective shear strength parameter for soils within the scope of the geotechnical investigations according to EN 1997-1 and EN 1997-2. The test method consists of placing the test specimen in the direct shear device, applying a pre-determined normal stress, providing for draining (and wetting if required) of the test specimen…

ISO 140-11:2005 specifies methods for measuring the acoustic properties of floor coverings from the viewpoint of reducing impact sound transmission. The purpose of ISO 140-11:2005 is to establish a method for determining the impact sound insulation of a floor covering under standard test conditions. The test is limited to the specification of procedures for the physical measurement of sound…

ISO 4788:2005 specifies dimensions, material and constructional and metrological requirements of graduated measuring cylinders of tall form (Type 1a and Type 1b) and of squat form (Type 2). All types are suitable for general laboratory use. The specifications in ISO 4788:2005 are in conformity with the principles of design and construction of volumetric glassware given in ISO 384.

ISO 18437-2:2005 defines a resonance method for determining from laboratory measurements the dynamic mechanical properties of the resilient materials used in vibration isolators. It is applicable to shock and vibration systems operating from a fraction of a hertz to about 20 kHz. ISO 18437-2:2005 is applicable to resilient materials that are used in vibration isolators in order to reduce --…

ISO 18437-3:2005 defines a cantilever shear beam method for determining from laboratory measurements the dynamic mechanical properties of the resilient materials used in vibration isolators. Common errors due to clamping the specimen are avoided by using fixed ends so there is no rotational motion of the beam at its ends. This part of ISO 18437 is applicable to shock and vibration systems…

ISO 9514:2005 describes a method, carried out under standard conditions, for preparing and storing a sample of a multicomponent coating system and subsequently assessing its pot life by measuring a particular property/ies. The method can be carried out either as a pass/fail test by determining the particular property/ies after a specified period of time, or as determination of the pot life by…

This International Standard specifies safety requirements for electrical equipment intended for sterilization, washing, and disinfection of medical materials in the medical, veterinary, pharmaceutical and laboratory fields, when used under the environmental conditions of 1.4. This document consolidates the requirements of four standards, IEC 61010-2-041, IEC 61010-2-042, IEC 61010-2-043 and…

This National Standard of Canada is based on International Standard ISO 15190:2003. 1 Scope This International Standard specifies requirements for safe practices in the medical laboratory.

This part of CISPR 16-4 gives guidance on the treatment of uncertainties to those who are involved in the development or modification of CISPR electromagnetic compatibility (EMC) standards. In addition, this part provides useful background information for those who apply the standards and the uncertainty aspects in practice. The objectives of this part are: a) to identify the parameters or…